Trunk Lid Liner Group Buy

[1 Bad Merc]

Scott,


Any info on my pending two decklids?

Thanks for any update.

Rgds

Brad Linthicum

[QWK SVT]

Scott, I'd also like to know the status of my order, when you get a chance...

TIA,
Mike

[seans]

I would like to know the status of my order also. I placed my order on 02/22/05. My order # is 001089.


Thanks

[QWK SVT]

Scott, I'd also like to know the status of my order, when you get a chance...

TIA,
Mike
Oh, my order number is 001121...

[Decklid Designs]

Scott,


Any info on my pending two decklids?

Thanks for any update.

Rgds

Brad Linthicum
I will email you your tracking #'s here shortly.

-Scott

[Decklid Designs]

Oh, my order number is 001121...
Same with yours..since its going to Canada, the shipping is more than double what is charged for those in the lower 48...I am waiting for Wes to get back with me on this issue...

ONE VERY IMPORTANT THING...I NEED YOU TO EMAIL ME YOUR PHONE NUMBER ASAP...UPS WILL NOT ACCEPT THE PACKAGE FOR SHIPMENT TO CANADA WITHOUT THIS INFO.

MY email is scottn@deckliddesigns.com

-Scott

[Decklid Designs]

I would like to know the status of my order also. I placed my order on 02/22/05. My order # is 001089.


Thanks
You should have yours already...I PM'd you the DHL tracking number just in case.

-Scott

[DTR04]

Yours have shipped, I emailed you the information.

-ScottReceived the Trunk Lid Liners on Wednesday. They look great. Well worth the wait to get them.:banana2: :banana2:

Thanks Scott.

[fastblackmerc]

Received the Trunk Lid Liners on Wednesday. They look great. Well worth the wait to get them.:banana2: :banana2:

Thanks Scott.
I received my 2nd lid liner (after the first was damaged in shipping). Was a snap to install and it looks gooooooood!

[Decklid Designs]

Scott,


Any info on my pending two decklids?

Thanks for any update.

Rgds

Brad Linthicum
Brad...YGM :)

[Marauderman]

I received my 2nd lid liner (after the first was damaged in shipping). Was a snap to install and it looks gooooooood!
Hey --PM what we talked about on this---let me know--does this mean......

[Joe Walsh]

Wes, Scott....any update on my trunk lid liner????

[Decklid Designs]

Wes, Scott....any update on my trunk lid liner????
Joe,

All of the orders are being processed in the order they were received. As you have already determined, this process is taking longer than expected. I am shipping 4-5 lids every week or so...sometimes longer. I can tell you that your lid is at the embroidery stage. I will email you when it is close to being finished.

Sorry I don't have more for you.

-Scott

[Decklid Designs]

Hey --PM what we talked about on this---let me know--does this mean......
You know, you might be able to fix that broken one...maybe someone will want to buy it from you???

[Mikeenh]

Wes,
Please read the last 2 pm's I've sent you on the trunk liners.
Thanks. Mike

[1 Bad Merc]

Hi Scott/Wes,

I received both my new trunk liners today from DHL. I opened it up to look at them and I dont think the stitching is right on the letters. I have two breaks/black lines at a 40 degree angle through most of my letters on both trunk liners. It looks like the machine had some kind of stitching problem. They are not that bad but noticeable and does not look clean. I really dont think they are supposed to look like this. What do you guys suggest? Was their a problem with the stitching machine?

Let me know what you guys think. I am not really happy since I had to wait so long and now they show up and dont look good. :bigcry: The flags look great and dont have any lines through the silver.

Pls. send me an email and let me know.

Rgds

Brad Linthicum

[Decklid Designs]

Hi Scott/Wes,

I received both my new trunk liners today from DHL. I opened it up to look at them and I dont think the stitching is right on the letters. I have two breaks/black lines at a 40 degree angle through most of my letters on both trunk liners. It looks like the machine had some kind of stitching problem. They are not that bad but noticeable and does not look clean. I really dont think they are supposed to look like this. What do you guys suggest? Was their a problem with the stitching machine?

Let me know what you guys think. I am not really happy since I had to wait so long and now they show up and dont look good. :bigcry: The flags look great and dont have any lines through the silver.

Pls. send me an email and let me know.

Rgds

Brad Linthicum
Its due to the size of the artwork and yes, the machine does miss a few since these have over 50,000 stitches in them. I sent you a PM with more info on this issue.

-Scott

[the_pack_rat]

Liner has been sold ...

Ad in classifieds section has been removed.

Thanks.

[jabird56]

Scott, Rec'd my trunk liner today with the same stitching issue that 1 Bad Merc stated. Would like a copy of the PM that you sent him please.

Regards,
Jay

Its due to the size of the artwork and yes, the machine does miss a few since these have over 50,000 stitches in them. I sent you a PM with more info on this issue.

-Scott

[QWK SVT]

Same with yours..since its going to Canada, the shipping is more than double what is charged for those in the lower 48...I am waiting for Wes to get back with me on this issue...

ONE VERY IMPORTANT THING...I NEED YOU TO EMAIL ME YOUR PHONE NUMBER ASAP...UPS WILL NOT ACCEPT THE PACKAGE FOR SHIPMENT TO CANADA WITHOUT THIS INFO.

MY email is scottn@deckliddesigns.com

-Scott
Scott - the email was sent some time ago... Any word on this order?

[GordonB]

Help!
Need to adjust the trunk lid torsion bars to handle the increased weight of the trunk lid liner. Have installed 2 lids and am worried about decapitating me and my wife! Can anyone tell me how to adjust the bars? Appreciate it.
Thanks,
GordonB

[MENINBLK]

Help!
Need to adjust the trunk lid torsion bars to handle the increased weight of the trunk lid liner. Have installed 2 lids and am worried about decapitating me and my wife! Can anyone tell me how to adjust the bars? Appreciate it.
Thanks,
GordonB

There is a tool that slips over the end of the torsion bars and allows you to move it up a notch to increase the tension.
I have NOT been able to find this tool.
I have asked my dealership about the tool and they don't have one.
They told me to ask a body shop.

I haven't had the time to start looking into body shops.

Someone else made a suggestion to be to use an old Serpentine belt to lift the bar to the next notch.
They also said I should wear eye and hand protection when doing this.

A third person suggested using a thin pipe on the end of the torsion bar.

Sorry I don't have any more info than this...

[RCSignals]

you could always use a Marauder trunk lid prop rod.

[MENINBLK]

you could always use a Marauder trunk lid prop rod.

WTF is this ?

[Ross]

Hmmmm, has anyone else had a problem with increased weight on the trunk lid? I received my liner awhile back, and it looks great, but I haven't gotten around to putting it in yet.

[GordonB]

MENINBLK,
Thank you for your suggestion. I figured thwere must be a 'tool' for this adjustment, because I could NOT move either bar with just my hands & fingers. I'll check with my dealer.
I'll let everyone know what I find out.
GordonB

[txmarauder]

I just looked at my bars and the driver is in the middle hole and the pass is in the bottom hole. If you take a wrench like a 1/2 or 9/16 you can slip the box end of it over the end like you would if you were bending a pipe or tube and you that to get the leverage to move it up a hole or down.

[Joe Walsh]

Hmmmm, has anyone else had a problem with increased weight on the trunk lid? I received my liner awhile back, and it looks great, but I haven't gotten around to putting it in yet.


I'm still waiting for mine ....and my generous patience is wearing thin! :mad:

[RCSignals]

WTF is this ?

Some people call it a golf club. ;)

But seriously, I've seen people use a rod to prop up their open trunk lid.

I think txmarauder is right about moving the torsion rods in the adjustment notches. You may find that's just how the dealerships/body shops do it. Carefully of course.

[QWK SVT]

I'm still waiting for mine ....and my generous patience is wearing thin! :mad:
I'm in the same boat :depress:

[03SILVERSTREAK]

Wow-you guys have been waiting for a while and I was considering an order. how long did they say is the waiting period???

[Ross]

It might have something to do with which logo or colors you order. I got mine several months ago after only a short wait. I know that Wes has always been good about delivery on anything that he has offered for sale.

[wchain]

We'll have to check with Scott, I am just the order taker here, he is the person fufilling them. I'll ask him to pop in.
Thanks
Wes

[frdwrnch]

The best tool I've found to adjust the trunk tension is a 10 or 11mm deep socket on a 6" long 3/8 drive extension. Slide it over the end and CAREFULLY move it to the next notch. This setup will not twist like a wrench will.

[frdwrnch]

The best tool I've found to adjust the trunk tension is a 10 or 11mm deep socket on a 6" long 3/8 drive extension. Slide it over the end and CAREFULLY move it to the next notch. This setup will not twist like a wrench will.

CORRECTION! There is not enough clearance to the trunk floor w/the extension but I tried it w/ a 3/8 ratchet and a 10mm deep socket and it worked.

[Paco]

Just looking for an ETA. Ordered a trunk liner April 20. Nothing yet - August 30. Two PM's to Wes. No updates. I know about production delays, but just wondering EXACTLY how long does it take to make one of these?

[wchain]

Scott has decided to shut production down on trunk lids until further notice, due to some supplier issues that he has had arise. If any of you have placed an order and paid already, I do apologize, please PM me and I will refund your credit card. IF you ordered and I did NOT charge your card, let me know as well and I will be clearing your info out of the system.

I do apologize for the holdup on these, and I beleive everyone that was in the group buy has been taken care of.

I will also be removing the liners off of my website.

[Paco]

PM sent. Thanks

[Tallboy]

I do apologize for the holdup on these, and I beleive everyone that was in the group buy has been taken care of.



I wasn't. Been waiting since February.

[QWK SVT]

Scott has decided to shut production down on trunk lids until further notice, due to some supplier issues that he has had arise. If any of you have placed an order and paid already, I do apologize, please PM me and I will refund your credit card. IF you ordered and I did NOT charge your card, let me know as well and I will be clearing your info out of the system.

I do apologize for the holdup on these, and I beleive everyone that was in the group buy has been taken care of.

I will also be removing the liners off of my website.
Still waiting for the liner, or at least an update :confused:

[QWK SVT]

Still waiting for the liner, or at least an update :confused:
The liner was received, last week. I haven't put it in, yet, but it does look purdy :2thumbs: