Need Measurements Please [Archive] - MercuryMarauder.net Forums

Alan CMS

07-21-2006, 01:48 PM

Can someone please post or PM to me the measurements of the fender area behind the front wheels? I specifically need the width (from wheel edge to fender edge near the door) of the fender directly above and below the beltline molding.

Thanks,

Alan

CRUZTAKER

07-21-2006, 08:00 PM

Can someone please post or PM to me the measurements of the fender area behind the front wheels? I specifically need the width (from wheel edge to fender edge near the door) of the fender directly above and below the beltline molding.

Thanks,

Alan

I am not quite clear what you are asking...but here are the results of my interpretation.:rasta:
3-1/4" AND 1-3/4"

MM03MOK

07-21-2006, 08:09 PM

My guess would be this area.....

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=95 02&d=1153534177

Alan CMS

07-21-2006, 10:18 PM

Those are the one's I need.

Alan

My guess would be this area.....

http://www.mercurymarauder.net/forums/attachment.php?attachmentid=95 02&d=1153534177

CRUZTAKER

07-22-2006, 07:55 AM

That is how I measured...
However...

I took a stick, laid it against the inner tread side of the tire, with that stick vertically plumb against the tire.

I thought you wanted wheel well clearance.

BRB....

CRUZTAKER

07-22-2006, 08:08 AM

9" AND 11" respectively.;)

Alan CMS

07-22-2006, 10:46 AM

Thanks, can you also please give me the length of the body side molding in the picture?

Your help is much appreciated!

Alan

9" AND 11" respectively.;)

Alan CMS

07-22-2006, 10:50 AM

That is how I measured...
However...

I took a stick, laid it against the inner tread side of the tire, with that stick vertically plumb against the tire.

I thought you wanted wheel well clearance.

BRB....

Sorry, I needed to be more clear. I just needed the length of the 2 red lines in the pic posted.

Alan