Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: Anyone ever get into RC stuff ??

  1. #1
    Join Date
    Jan 2006
    Location
    Mi.
    Posts
    1,499

    Anyone ever get into RC stuff ??

    Yep me to.......


    I`ll start with this one........i forget the scale but its a little bigger then your hand..........



    Then i just had to put the brushless motor in it and better battery and got it going right about 62 mph...........



    Got into some nitro burning cars and trucks...



    We would race these every nice sunday ,,,,,,,,had a blast with these .......motors where right about 3hp and spun to right about 58,000 rpm........yep 58,000 rpm 30% nitro

    Then i had to try this guy.......its a 10th scale with a big block .21 motor with a 3 speed trans.........




    Then i had to try one of these ofcoarse.....



  2. #2
    Join Date
    Jan 2006
    Location
    Mi.
    Posts
    1,499
    So then that stuff got alittle boring so a buddy and i where looking at my gas buggy that i just got and said what if we move the motor over and put this motor next to it ?? I SAID HELL YA.........
    right about 5.4hp and each motors spins about 36,000 rpm




    BUT that was not enough so what else ??




    Last edited by bigcowl-imp; 02-18-2012 at 06:29 PM.

  3. #3
    Join Date
    Jan 2006
    Location
    Mi.
    Posts
    1,499

  4. #4
    Join Date
    Sep 2007
    Location
    townsend DE
    Age
    34
    Posts
    12,474
    you kidding me? nitrous for RC cars?
    2010 fusion se


  5. #5
    Join Date
    Apr 2005
    Location
    Queens NY
    Age
    48
    Posts
    12,182
    I remember back in the day when I had my Nitro car, a 2 speed tranny was all that was available and you had the fun of trying to adjust the shift points with a allen key set screw.
    I since got rid of my gas powered car and went for the cool factor.

    Tamiya Knight hauler with 3spd electric shift transmission and MFU installed.

    2003
    MERCURY MARAUDER 300A

    Build Date
    5/31/02
    Sequence#
    #363 of 7839 Black Marauders
    Dyno tested power
    450 RWHP & 405 RWTQ on 93 octane
    Best 1/4 mile time to date
    12.456@109mph
    Visit my Garage
    Blackened300a's Garage



  6. #6
    Join Date
    Jul 2009
    Location
    NH
    Age
    55
    Posts
    7,606
    Boy! I'd hate to see the end result if crack and hookers were your hobby!
    11.931 @ 116.33 (MT ET Streets)
    12.073 @ 118.43 (Nitto 555)

    I love the smell of Nitromethane and rubber in the morning!
    Drag racers prayer:
    As I lay rubber down the street, I pray for traction I can keep, but if I spin and begin to slide, please dear God protect my ride." -Amen

  7. #7
    Join Date
    Jan 2006
    Location
    Mi.
    Posts
    1,499

  8. #8
    Join Date
    Mar 2009
    Location
    North Aurora, IL
    Age
    49
    Posts
    11,836
    Wow!! Those are all so very cool!!


    Sent from my iPhone
    Eaton Swap + 4.10's = Wreeeeeeeeeedom!!





    Great quotes!!
    Quote Originally Posted by CBT View Post
    you were too busy getting your ass kicked by cool people because you suck and are a worthless excuse for a human being.
    Quote Originally Posted by CBT View Post
    I'm going to punch you so hard between the legs your going to need a GYNA BO to fix it!!
    Quote Originally Posted by Haggis View Post
    Eat poo poo and die heathen.

  9. #9
    Join Date
    Oct 2011
    Location
    san francisco ca
    Posts
    99
    i used to mess with nitro trucks. i had a cen genesis, never got it to run right. ended up mesin with the hpi savage truck.. the best truck i ever had.. then gave it all up completely

  10. #10
    Join Date
    Dec 2009
    Location
    Earth
    Posts
    8,032
    I've built and flown dozens of model airplanes over the years. The best is a P38 Lightning with two 4 stroke motors, retractable landing gear and a 6 foot wingspan. It took me 3 years to build from a balsa kit. It still flies great!

  11. #11
    Join Date
    Oct 2010
    Location
    PA
    Posts
    932
    Here is some of the stuff I just sold.

    Revo: Big block conversion, I had to build the conversion myself, there were no kits at the time. This is right after playing and it was filthy




    Custom built rock crawler. I ordered the chassis and built the rest:






    I had a T-Maxx, all Super Maxx aluminum parts, with a big block conversion, but didn't get a chance to get any pics before it sold. Between two enthusiasts, they bought all of my stuff within 48 hrs of posting it on Craigs List
    I loved these cars. I enjoyed building them more than driving them.
    SEMPER FI From York, Pa

  12. #12
    Join Date
    Feb 2005
    Location
    Clinton, MD
    Age
    50
    Posts
    1,151

    Going on 15 years now...

    I have 3 carbon fiber touring cars, 1/10, 1/9th, and 1/8 scales. All do 80 mph or better. Brushless truggy and a couple of 16th scales. My garage is a RC chop shop.

    Welcome to the DARKSIDE...

    2003 Black Mercury Marauder

    Black and Chrome RPM 505 wheels staggered 18x8 and 18x9, Custom tune by ELD Performance, JLT cold air intake, FRPP 4:10 gears, PI 3000 Stall Torque converter, PHP intake spacer, Stainless Works Complete Exhaust, Eibach Pro Springs, Steeda underdrive pulleys, Custom Painted Black factory spoiler, 15% Tint front and rear , Kenwood Excelon 6x8 Front and 6x9 rear Speakers, Pioneer 600w 4 channel amp, Zack and Mack Control arms, Addco Front and Rear Sway bars

    Best run: 13.75 @ 99.6 sec on 4 May 07

  13. #13
    Join Date
    Jun 2010
    Location
    Plano
    Age
    50
    Posts
    200
    I have built and sold off a few Axial based crawlers in the past few years. There's a group in DFW that get together for crawling comps. Thinking about building another one but haven't gotten the itch bad enough yet.
    2003 MM
    1985 CJ7

  14. #14
    Join Date
    Mar 2007
    Location
    Hawaiian Islands
    Age
    60
    Posts
    1,943
    I've got Helis, planes, war birds, trucks, crawlers, Sand Rails, 90+mph Monsters...

    I love this stuff...

    Aloha


    '03 A Build Date 8/02
    F.I.T. #6 ***RESURRECTED***
    *444 RWHP / 401 RWTQ
    *10 lbs. Boost
    *P1SC1 ProCharger
    *SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F

    When I turn on my car...It returns the favor

  15. #15
    Join Date
    Nov 2005
    Location
    Laurel, Delaware
    Age
    63
    Posts
    858
    I had a 30 size Hirobo Shuttle ZX Helicopter, I now have a 60 size elactric helicopter , an airplane and a T-Maxx 4x4 truck. I just got the second heli for Christmas, now waiting for good weather and time to brush up on my Heli relearning.
    Voted #2 Display at MVV, Best of Show N/A at Carlisle 2010, Best Display at Carlisle 2011, 2012, 2013, Best Display at MVIX, Best Display and Best of Show N/A at Carlisle 2014, Best Display at Carlisle 2015
    Capital Area Marauders Member (CAM)
    03 Silver Birch 300B Built 6-2-03, Adopted 6-24-03, Sequence# 7604 of 7838--Color Sequence# 306 of 418
    American Racing "Rogue" (ROUSH RR05) Chrome Wheels +25 Rear, +35 Front, Stock Tires, Custom Trunk Organizer, Lidio's Tune, Flowmaster 40's, K&N CAI, KVR Rotors /Hawk Pads, Tint 35%, Ford GT Coil Covers, KB Dead Pedal, Reinhart Automotive Pro-Gard, Euro Front Plate "SILVRBULLET"and /or "03 MM 7604", SIRIUS Satellite, Rear Spoiler, SS Inserts, SRP Pedals and Sills, Colex Caps.

    cam·ma·rau·de·rie
    Pronunciation: "käm-'maräu-d(&-)rE,
    Function: noun
    Etymology: American Mercury family, from Cam Marauder comrade (Member)
    : a spirit of friendly good-fellowship of Marauder Enthusiasts

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale More stuff
    By Richy04 in forum Marauder-specific Parts for Sale
    Replies: 13
    Last Post: 02-22-2011, 07:57 AM
  2. For Sale a ton of stuff, new and used.
    By ImpalaSlayer in forum Marauder-specific Parts for Sale
    Replies: 34
    Last Post: 11-02-2010, 02:21 PM
  3. For Sale More MM Stuff...
    By jdenning002 in forum Marauder-specific Parts for Sale
    Replies: 26
    Last Post: 04-27-2010, 09:28 PM
  4. Hey Wes...we need NOS stuff....
    By CRUZTAKER in forum Innovative Interceptors
    Replies: 3
    Last Post: 06-23-2005, 10:46 PM
  5. More e-bay stuff
    By SergntMac in forum Shop Talk
    Replies: 17
    Last Post: 12-27-2004, 04:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •