most of the time im fliing my helis only time there fliing right side up is when im landing or taking off other then that i fly 3D the whole flight!
most of the time im fliing my helis only time there fliing right side up is when im landing or taking off other then that i fly 3D the whole flight!
2004 MM (Black) #112 of 3213 (SOLD)
2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
3.35 L 4X4
-AND-
SLAYER1
formerly owned by "Impala Slayer!! 2004 SB MM
Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...
As expensive as it is...it's still cheaper than working on the MM... Except when a $400 plane is turned into confetti in 20 seconds, during the maiden flight...UGH!...Good times!
Pics coming!
I'm on Oahu...Maui is a nice island...
The "Apprentice" (E-Flight) is a very good trainer plane...
Aloha
Last edited by Local Boy; 02-21-2012 at 07:14 PM.
'03 A Build Date 8/02
F.I.T. #6 ***RESURRECTED***
*444 RWHP / 401 RWTQ
*10 lbs. Boost
*P1SC1 ProCharger
*SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F
When I turn on my car...It returns the favor
I did an RC air boat that was fun to do spent like 300-800 bucks on it and it just sits at home what a shame . I prob sell it for 100 if you wanted it
Last edited by Guittard22; 02-22-2012 at 05:05 PM.
Here's some things that are fun...
All surface models have the Mamba Monster motor/Castle programmable ESC and are in the 70+ MPH range (22.2 volts), except the AX-10 and the Wraith which has the VXL 3S Motor/ESC which has Tons of Torque (geared down) and runs @ 25MPH (Rock Crawler/Racer)...All are water proof...
The Sand Rail is my first attempt to weld a custom pipe body, then powder coated it silver...
Drinking and Driving is required... But, limited when flying... learned that lesson early into flying Helis and planes (hint: No rotors on the 450 Pro, and the Corsair on the wall)...All Air models fly with a full array of telemetry signals (batt volts, reciever volts, signal strength, etc...Using the DX8 Spectrum Transmitter... Been flying off and on for @ a year now...Still learning...
http://mercurymarauder.net/forums/at...1&d=1330018185
Aloha...
BTW: Let's see that air boat...
Last edited by Local Boy; 04-23-2018 at 07:59 PM.
'03 A Build Date 8/02
F.I.T. #6 ***RESURRECTED***
*444 RWHP / 401 RWTQ
*10 lbs. Boost
*P1SC1 ProCharger
*SCT Tuned *SCT Big Air 2400 MAF *BAP *GT 40 Fuel Pump *Modified FPDM *SSW Headers *MMX Drive Shaft *Metco Drive Shaft Loop *Metco Control Arms *T/A Stud Girdle w/ Diff Cover *Addco Sway Bars 3,500 Stall B/C Auto. Torque Converter *J-Mod *Wilwood 13" Big Brake Kit *Brembo Drilled/Slotted Rotors (Rear) *Widened Rims w/ 295 Nitto 555 *Autometer Wide Band A/F
When I turn on my car...It returns the favor
Ha at least i`m not the only one ........
I know my son 1 bad Merc has maybe 30-40 electric motors for cars, racing boat with a big ( lawn mover motor I think) that he was selling remote controls etc. don't know whether he still has but think so!
There are currently 2 users browsing this thread. (0 members and 2 guests)