Is anyone still making hood insulator pads for MM? Mine is a bit worn and time to replace.
Is anyone still making hood insulator pads for MM? Mine is a bit worn and time to replace.
1965 FALCON WAGON
1967 RANCHERO
1968 MUSTANG GT FASTBACK
2004 300B MARAUDER TRILOGY #127
Retired 2003 300A MARAUDER
NEW ADDITION! 1968 Shelby GT 350
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Camotorsports.com but they are pricey with shipping. go to your ford dealer and have them get one for a Crown Vic (exactly the same) they are around $148. If you order thru tascaparts.com they are cheaper, but shipping kills it..cheaper thru ford dealer and no shipping. I got a new one last summer, have yet to put it on
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Mine was looking worn too, took it off spray painted it and now looks new. If you have rips or anything this will obviously not help.
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
This+++++
Dealer item.
BUY ALL NEW PUSH CLIPS TO INSTALL TOO!
You can talk them down some. I ordered two and got 2 different types. You will have to cut hole (rectangle) for underhood light. Suggest large clean table to set new on top of old, new sharpie, straight edge, and new razor knife or super sharp strong shears. Once opening cut, I used a crimper around the inside of rectangle edges, and large sharpie to black out the inner edge.
It was an amazing transformation in under hood look.
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
#2941 300A
4.10's, carbon clutches
Marty O Tune
Curless Cure
Widened Wheels
Dead Pedal
Eaton Swapped
Bar tender and maker of:
Christmas in a cup
The "Bucket of South Haven Iced Tea"
One Legged Lesbian Kickboxer
Cocka Two
I have no under hood light
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
I took mine off painted it and it looks bad ass lol
2003 MM 300A
#738 of 7,838 BLK
Build date: 6/6/2002
Adopted: 2/05/2013
MODS:
Metco control arms, Addco sway bars, TCE brake lines, Gatorback belt, remote start, underbody lights, custom doorsills. Black with custom silver hood stripes (S-55 theme)
2004 CV LX SPORT
ALL BLACK, 6 DISC, TUNED MZT
Adopted on12/09/18 from chief455
COMING SOON-Trilogy #005 THANKS CWright-
I am afraid you have awakened a sleeping Giant
http://www.mercurymarauder.net/forum...=view&id=14156
BIG BIG thanks to the GOD of marauder parts ( Darren) I am the 1st winner of Darren bag of fun give-away
I used GM clips, they are a better design.
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Steven
2004 Marauder Black, loaded
Vortec S/C
4.10s
3500 PI Stall
Kook's headers
476.9 rwhp 385 lbs/tq
KVR's, QA1's, M&Z control arms, rear sway bar
Lidio tune
2004 Suburban Dark Charcoal
1970 W-30 442 convertible twilight Blue
There are currently 1 users browsing this thread. (0 members and 1 guests)