Everything Marauder, LEDs & HI
Going to change out my rear end cover when I upgrade to 31 spline axles, spider gears, "S" spring and carbon clutches. Any recommendations for a sealer I can apply to the inside of the new aluminum cover? Obviously it will need to withstand oil and some heat.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
MO derator
Clear Powdercoat or anodize.
For my money, I would clear powder coat it.
Everything Marauder, LEDs & HI
Didn't think of that. Will check it out.Originally Posted by martyo
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
WINDY CITY MARAUDERS
Theres a sealent thats just for diffs
Vin: 2MEHM75V63X615175
Build Date: 6/10/2002
Serial#: 995 of 7839
995 of 7093 Black
Accel coil on plugs/Autolite 104s/ K&N intake/Flowmaster 40s/Powdercoated goodys/
LED Grille scanner/BIGCARSFOREVER Dead pedal/SCT Tune/BBK Power Plus twin blade 65mm throttle body
Everything Marauder, LEDs & HI
Clarification.... I'm looking for something to seal the aluminum, not to make a gasket.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
Why do you need to "seal" aluminum Jim??
No Marauder
Everything Marauder, LEDs & HI
The current aluminum cover is seeping.Why do you need to "seal" aluminum Jim??
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
Wonder why??
If it's that porous I'd replace it since the strength cannot be all that great??
No Marauder
Everything Marauder, LEDs & HI
That's why it's being replaced.Wonder why??
If it's that porous I'd replace it since the strength cannot be all that great??
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
WINDY CITY MARAUDERS
So there there is a crack
Vin: 2MEHM75V63X615175
Build Date: 6/10/2002
Serial#: 995 of 7839
995 of 7093 Black
Accel coil on plugs/Autolite 104s/ K&N intake/Flowmaster 40s/Powdercoated goodys/
LED Grille scanner/BIGCARSFOREVER Dead pedal/SCT Tune/BBK Power Plus twin blade 65mm throttle body
S/C 20" MINI TUBBED WHEEL GUY!
since its the inside of the aluminum diff cover you are concerned with sealing I would use POR15
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Turbo Marauder
Por15 does not adhere well to anything other than rusty surfaces....from my own experience
S/C 20" MINI TUBBED WHEEL GUY!
Ive used it on many floorboards with no rust and its still intact , ive only been using it over 20 years!
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**
VISIT MY GARAGE FOR A FULL LIST OF MODS
Senior Member
A difference in opinion from knowledgeable people. Who would have guessed. Life goes on, no hurt feelings.
Excess in Moderation.
Sprinkles are for winners.
Senior Member
Why would any company manufacture a quality piece of cast aluminum that requires sealing before use??
Sounds like you just got a bad one before Jim!!
No Marauder
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
