Page 1 of 2 12 LastLast
Results 1 to 15 of 24

Thread: Valet Key

  1. #1
    Join Date
    Dec 2002
    Location
    NewBrockton AL.
    Age
    74
    Posts
    955

    Valet Key

    I need to find where I can get a Gray Valet Key.
    03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
    Metco D/S Loop,Boxed Lower Rear Control Arms
    New Made Upper Rear Control Arms
    Boxed Watts Link,Ford Finned Rear End Cover
    Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
    Daniels Coil Covers and Buttons,Nitto 255/45 front
    Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Dec 2002
    Location
    NewBrockton AL.
    Age
    74
    Posts
    955
    The one I am looking for is light gray.
    03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
    Metco D/S Loop,Boxed Lower Rear Control Arms
    New Made Upper Rear Control Arms
    Boxed Watts Link,Ford Finned Rear End Cover
    Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
    Daniels Coil Covers and Buttons,Nitto 255/45 front
    Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.

  4. #4
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by Bob Mathis View Post
    The one I am looking for is light gray.
    That is why I said to check with the seller(s) as pictures on the computer are not a true representation.

    Check locksmiths and hardware stores.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  5. #5
    Join Date
    Oct 2004
    Location
    MO
    Age
    65
    Posts
    1,394
    this seller has Lincoln ones, maybe they can locate a Mercury one. . .
    http://www.ebay.com/itm/Valet-Key-Bl...30deae&vxp=mtr
    ncmm
    '04 Silver Birch MM 300A, build date:03/11/04, bought new 10/04 traded 8/08, 27k miles,

    '04 Silver Birch MM 300A, build date:12/23/03, bought used 3/16/12, 24k miles
    113k miles as of 8/21/19. . .

    update. . . sold 11/5/2019, 116k miles

    Visit My Old Gallery

  6. #6
    Join Date
    Mar 2003
    Location
    Las Vegas, NV (Henderson)
    Posts
    877
    I looked several years ago and it seemed no one was making the Mercury logo one. The Lincoln one, but not the Mercury one. The valet key just doesn't have the programable RFID chip in the head...sooo, I thought about taking a Mercury logo transponder key and painting it grey and then just not programming it to the car. A lot of work to just have an inoperable logo key. I'll bet there's a bunch of Marauder valet keys sitting in previous owners sock drawers...lol
    His: Blue w/Light Flint Born 02/05/03 (Wednesday)
    6674 of 7838, Color sequence 102 of 327

    1 of 111 Without Heated Seats
    6 CD Changer in Trunk
    Locking Lugs
    Trunk Organizer
    Real Oil Press Guage w/MM Face
    Marauder Side Emblems
    Rear Bumper Inserts

    Nephews: Blue w/Light Flint
    Born 02/05/03
    6673 of 7838, 101 of 327 Blues 1 of 111 Without Heated Seats
    Cars purchased 7 years apart, but are only 20 VIN numbers apart. Sequential units on the assembly line.


    Hers: Black 300A w/Charcoal Born 06/25/02 (Tuesday)
    2011 of 7838
    .
    Locking Lugs
    Trunk Organizer
    Real Oil Press Guage w/MM Face
    Factory Alarm
    Marauder Side Emblems
    Rear Bumper Inserts

    #4 (Pound Rescue Marauder) 2003 DBP/Light Flint
    120 of 328 DBP 1 of 217 with heated seats.
    6705 of 7838 2003's
    Built Friday 02-07-2003
    Bought 09-10-2012

    #5 2003 DBP/Light Flint
    136 of 327 Blues 1 of 111 W/O Heated Seats
    6741 of 7838 2003's
    Built Tuesday 02-11-2003
    Bought 05-06-14

  7. #7
    Join Date
    Dec 2002
    Location
    NewBrockton AL.
    Age
    74
    Posts
    955
    I had thought about doing that too.
    03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
    Metco D/S Loop,Boxed Lower Rear Control Arms
    New Made Upper Rear Control Arms
    Boxed Watts Link,Ford Finned Rear End Cover
    Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
    Daniels Coil Covers and Buttons,Nitto 255/45 front
    Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.

  8. #8
    Join Date
    Aug 2014
    Location
    Bowling Green, KY
    Posts
    560
    Quote Originally Posted by vegasmarauder View Post
    I looked several years ago and it seemed no one was making the Mercury logo one. The Lincoln one, but not the Mercury one. The valet key just doesn't have the programable RFID chip in the head...sooo, I thought about taking a Mercury logo transponder key and painting it grey and then just not programming it to the car. A lot of work to just have an inoperable logo key. I'll bet there's a bunch of Marauder valet keys sitting in previous owners sock drawers...lol
    I thought the Valet key just wouldn't operate the trunk or glove box? All I have is a Valet key, and that's how mine seems to work, what's the deal with the RFID chip, I know it's not needed for those two locks.
    03 Marauder 300a
    392 hp / 406 tq

  9. #9
    Join Date
    Aug 2011
    Location
    Chicago
    Posts
    1,212
    My valet key is somewhere between my briefs and lingerie. What exactly do i need for again? Lol

    Sent from my SGH-M919 using Tapatalk

  10. #10
    Join Date
    Jul 2012
    Location
    Seattle Washington
    Posts
    911
    Valet keys need to be programmed too.
    Last edited by Logizyme; 12-10-2014 at 07:31 PM. Reason: Nevermind I'm dumb
    I eat apples until my stomach feels much more full than its normal.

  11. #11
    Join Date
    May 2011
    Location
    Schenectady, NY
    Posts
    1,246
    I have a grey valet key with the merc symbol on it. Also has valet on it.
    300A Black
    4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.

  12. #12
    Join Date
    Dec 2002
    Location
    NewBrockton AL.
    Age
    74
    Posts
    955
    We found the valet key.
    03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
    Metco D/S Loop,Boxed Lower Rear Control Arms
    New Made Upper Rear Control Arms
    Boxed Watts Link,Ford Finned Rear End Cover
    Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
    Daniels Coil Covers and Buttons,Nitto 255/45 front
    Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.

  13. #13
    Join Date
    Sep 2010
    Location
    Western WA
    Posts
    801
    The Valet key has the same RFID function as a regular key, the only difference is that it's blade is too wide to fit in some of the locks.

  14. #14
    Join Date
    Dec 2008
    Location
    South Carolina
    Age
    40
    Posts
    3,564
    Question does the valet key lock and unlock the trunk from the door
    03 300a. black #1695 of 7839 born 6/20/02.
    Adopted 3/31/11. Sold


    03 300a black #1199
    TERMINATOR SWAP
    430rwhp. Done by mo's

  15. #15
    Join Date
    Sep 2010
    Location
    Western WA
    Posts
    801
    Quote Originally Posted by slickster View Post
    Question does the valet key lock and unlock the trunk from the door
    Are you talking about the trunk release button in the driver's door panel. If so then no the valet key will not unlock that button. When I bought mine all I got was the Valet key and the trunk button was locked so the only way I could open the trunk was to use the remote and I only got one of those too.

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Valet Key
    By Ross in forum Shop Talk
    Replies: 20
    Last Post: 03-03-2014, 07:42 PM
  2. Valet Key
    By juno in forum Community Discussion
    Replies: 17
    Last Post: 07-28-2010, 04:21 PM
  3. Valet Key?
    By Lou in forum Shop Talk
    Replies: 7
    Last Post: 06-27-2005, 03:28 PM
  4. Valet key
    By MapleLeafMerc in forum Community Discussion
    Replies: 8
    Last Post: 10-28-2003, 11:41 AM
  5. Valet Key
    By Dr Caleb in forum Shop Talk
    Replies: 6
    Last Post: 09-19-2003, 02:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •