Looking to buy a low mileage driveshaft for my 03 Marauder. PM me if you have one.
Thanks
Gary
Senior Member
Looking to buy a low mileage driveshaft for my 03 Marauder. PM me if you have one.
Thanks
Gary
2003 DBP Marauder
Build # 6700
#117 of 328 DBP
02/06/2003
My biggest fear is when I die my wife will sell my cars and parts for what I told her they cost!
S/C 20" MINI TUBBED WHEEL GUY!
I would love to sell mines , but I think the shipping will be too high!Originally Posted by SVOMACH1
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Senior Member
Shipping would be to MI 49783.
2003 DBP Marauder
Build # 6700
#117 of 328 DBP
02/06/2003
My biggest fear is when I die my wife will sell my cars and parts for what I told her they cost!
S/C 20" MINI TUBBED WHEEL GUY!
Man I was just in Michigan! not sure if FedEx , or UPS will ship a driveshaft , may have to check with Yellow freight , ive never shipped one.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**
VISIT MY GARAGE FOR A FULL LIST OF MODS
Sick-Speed play toy
Nothing special, just a long 6X6 box with some padding. Picked my last one up from the UPS hub the night before Louisville because I wasn't about to delay my trip a whole day.
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
"Since 2004"
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
S/C 20" MINI TUBBED WHEEL GUY!
Oh cool! I'll see if I can figure out a shipping quote
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**
VISIT MY GARAGE FOR A FULL LIST OF MODS
Everything Marauder, LEDs & HI
Why does it have to be low mileage? Just get the u-joints replaced and the shaft balanced. As long as it isn't bent your good.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
My mechanic thinks the creaking noise I've been after is coming from the shaft. The u joints are new.
2003 DBP Marauder
Build # 6700
#117 of 328 DBP
02/06/2003
My biggest fear is when I die my wife will sell my cars and parts for what I told her they cost!
Everything Marauder, LEDs & HI
Maybe the new u-joints are bad or installed improperly. Not much to the driveshaft that would cause a creaking noise.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Senior Member
What he said.
Ive shipped driveshaft before via usps post also. Shipping is the not problem. Its the cost and it shouldnt be no more then $30-40 bucks. Might be even cheaper, cant remember.
Senior Member
Find someone parting a pi crown Vic in town. Buy it.
Senior Member
Driveshaft was the name of the band on the TV serious LOST !
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
Senior Member
Ha Ha, yes it was. I think I'm barking up the wrong tree with replacing the driveshaft so I'm no longer in the market.
Thanks
2003 DBP Marauder
Build # 6700
#117 of 328 DBP
02/06/2003
My biggest fear is when I die my wife will sell my cars and parts for what I told her they cost!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
