Senior Member
I'm looking for the shifter linkage and the cable that goes from the column to the shifter. Guessing so you can't take the key out in drive? Also need the big a/c tube or center console bracket. Would also like factory trans cooler lines in good shape.Lmk what you got. Thanks. Text if you like for faster response. (602) 796-6099
Weißbirke Plünderer
I don't believe there is any linkage from column to shifter..these are floor mounted shifters..nothing on column that I am aware of
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Senior Member
Lol. I just cut one to do my 6 speed swap last weekend so I hope there is.
Weißbirke Plünderer
what kind of shifter cable would be inthe column of a floor mounted shifter?? there is the ignition switch..what kind of car are you 6 speed swapping?
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Senior Member
I already swapped it. Its an 03 marauder. Go out to your car and start it. Put it in drive. Turn your car back off with in drive. Try to pull your key out.. see how it goes.
Senior Member
There has to be something telling it to not let the key come out unless its in park.
BiRDMAN
That's called the Brake Shift Interlock, keeps the vehicle from starting or restarting in any gear besides P and N.
2004 Silver Birch 300B
Build date:9/29/2003, Adopted on 12/02/05
Exhaust by Greg
13.630 @ 100.49 mph (11/21/10)
2015 Ford Focus SE Sport FWD
2013 Lincoln MKS EcoBoost AWD (377whp/423tq).
2010 Ford Fusion Sport FWD
1989.5 Ford Mustang 5.0 LXsport
Weißbirke Plünderer
That would be the only thing i can think of was relating to the ignition.Originally Posted by ctrlraven
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Turbo Marauder
If your neutral safety switch wiring is hooked up the key comes out.
Senior Member
I want the parts so I can go back to auto.
Willing to meet up half way
But you just changed to manual, now your going back??????
I LOVE Jerry's bar, it's my kinda place...........
When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.
"Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "
Trilogy # 192 / T.S. 0012
BOOST GETS YOU FELONY STOPPED!!!
Senior Member
Thinking about it. I don't like the feel of the 6 speed. I'm working on make ng the pedals and shifter more comfortable but at this point I don't like driving it.
Turbo Marauder
You can do the necessary wiring at the trans harness.
At the connectors attached to the trans dipstick
Senior Member
Or I could buy the parts.
Turbo Marauder
I just installed a TH400 in my car and no cable is hooked up to anything.
Its electronic Dude (pun intended)
EDIT: now you have me thinking lol
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
