Knukonceptz is my choice
Knukonceptz is my choice
My brother and I lined the aluminum floor pan of the Cobra with Dynamat.
It is heavy and expensive stuff....but it works great!
The Cobra is dead quiet on the road and over bumps..... .... well except for those pesky 4 inch side pipes!....
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
I have not priced jute and by jute I mean the layered tar paper looking stuff under the jute padding. It may not even be called jute but that's what I was told.
All the jute padding (stuff that kind of looks like carpet padding) I am gonna replace, already bought it actually. Not sure where to look for it honestly Marty, I haven't seen any on ebay or rockauto or Dearborn or anywhere else.
Was thinking of buying something maybe from like Grainger but their padding material that is similar to that is expensive.
Where would I look to find this stuff by the yard?
Last edited by Matt34; 08-04-2014 at 06:25 PM.
Here it is in the front. It's about 1/8 of an inch thick and I think its original but cant really be sure
Replace with the Dynamat or other brand materials we talked about. Then cover with jute and carpet and don't look back.
ok, will do
There are currently 1 users browsing this thread. (0 members and 1 guests)