My Nitto Motivos are neither noisy nor floppy. I love them and plan on another set when these wear out.
My Nitto Motivos are neither noisy nor floppy. I love them and plan on another set when these wear out.
The 5yr olds stitching up Nikes seem to make good products. Why wouldn't the same 5yr olds make good shoes for your car?
I eat apples until my stomach feels much more full than its normal.
My 555s are very quiet and am pleased with the ride! What sizes did you run? I had 420's on the rear with a bigger sidewall and they were sloppy due to the amount of flex.
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
Yeah that's weird same size on my front too but less than a year old.
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
I agree. I just purchased the Nitto 555's (265 50 18's) for the rear. I am pleased with them so far. I currently still have the 235 BFG's in the front that still have plenty of tread. Looking forward to putting some 255 45 Nitto 555's on the front when the BFG's are worn out.
"RescuRauder", Born on 09/02/2003 & rescued on 04/05/2013. #236 of 3214 and #62 of 1237 in Black. CAI, Some kind of tune, Kooks Headers, X-pipe w/Hi-Flow cats, Magnaflow mufflers, Resonators removed, 4.10's, Metco U&L CA and Watts link, Drilled & slotted rotors, now BOOSTED!! Eaton Swapped 12/29/19!!
Sold! 1986 Mustang GT Vert, Black, 5spd, new short block, Powerheads, Crower 15511, gears, exhaust etc.
1968 Ford (Galaxie) XL fastback, 390, factory buckets & auto on floor
2011 Shelby GT500, Kona Blue with SVT Performance Pkg & Navigation, VMP tuned ~550rwhp/550rwtq. Finally Blown!
I will never allow anything but Nitto 420 rear and 850+ front to grace my rims. They over exceeded my picky ness.
Self proclaimed Builder Of Badassery.
Buy it, Break it, Build it BETTER.
"Since 2004"
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
2020 Ford Ranger STX DFI Turbo 2.3L 10 speed Auto
2017 Ford Fusion Sport DFI Twin Turbo 2.7L V6 6 speed Auto (14.000 ET bone stock in 82 degree heat)
1985 Mustang GT 5.0 Hatchback 4bbl 5 speed manual (525 HP 363 Dart block/AFR heads with Magnum 6 speed in the works)
1984 Mustang GT 2.3 Turbo Convertible FI. 5 speed manual
1966 427 Cobra (ERA) 468 all Aluminum FE 2x4bbl 5 speed manual
SOLD : 2003 Mercury Marauder FI. 4 speed Auto
w/Crower Cams & Springs, +1mm SS valves, mild port job on the cylinder heads.
Extrude honed intake w/PHP spacer.
Kooks Headers w/2.5" High Flow Cats & X-Pipe, Magnaflow mufflers, OEM tailpipes w/Megs Tips
B&M Trans cooler w/fan, Level 10 Shift Kit, Art Carr Hughes Deep Sump Trans Pan,
SVO Rearend Girdle, Redline Gear lube; OEM 3.55s
'Real Gauges' + matching Trans Temp, Oil Temp, Water Temp, Fuel Pressure, Vacuum/Boost Gauge
Built: 10/15/02 Bought: 12/16/02 Sold: 10/15/18
There are currently 1 users browsing this thread. (0 members and 1 guests)