Results 1 to 15 of 15

Thread: EATON PARTS FROM 2004 COBRA

  1. #1
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

    Exclamation EATON PARTS FROM 2004 COBRA

    $2200 OBO.

    Last year I bought a complete Cobra engine pull from a 2004 Cobra, to use the longblock in my Vortech Marauder. For sale is everything that I got in the package, except the longblock itself, which I used in my car. I AM NOT INTERESTED IN PARTING OUT AT THIS POINT IN TIME.




    The main parts of interest that are included are:
    - Eaton blower with stock elbow and TB
    - Lower intake
    - Stock Intercooler
    - Cobra front timing cover with all factory pulleys, tensioners, pulley bridge
    - Cobra alternator and brackets
    - Cobra intake tube, MAF, and filter (included but not shown in these pics)
    - Cobra cooling COT (Cross Over Tube)
    - Cobra dual crank pulley and bracket
    - 39# Cobra fuel injectors
    - Cobra fuel rails
    - Wiring harnesses

    The parts have been cleaned up much nicer than that top picture; here's some shots of them all taken off the motor:










    Note the chip on the intake elbow - this will be covered up completely by the intake tube and will not affect performance or reliability whatsoever.


    The Eaton has an upgraded non-slip pulley of some sort; sorry guys I don't know my Eatons very well and can't say exactly what it is.



    Here's a video of the actual blower running, zero issues (I have never used it myself but it spins nicely)


    NOTE: The guy shorted me the nice aftermarket intake tube, MAF and filter. Instead I have a stock (black) Cobra intake tube, Cobra MAF and conical filter.

    Also, I did NOT get the cobra aftercooler, so there is not one included with this package.


    UPDATE SEPT 14: Here's some more pics of the parts, I took these to post it on eBay.


    Note, that's an actual K&N CAI.

    SAVE ON SHIPPING - if you don't need or won't use some of the heavier pieces like the starter, AC compressor, alternator, Cobra Exhaust manifolds, EGR tube, or steering pump, let me know and I won't ship them. They add a ton of weight and those parts alone will probably cost another $100 to ship.




    Full Cobra engine harness, you'll need some of these plugs to get everything going in your Marauder.






    And the rad hoses and thermostat, don't know if they'll be much use to someone installing this in Marauder, but there you have it.




    The Cobra timing cover is also included, exactly as shown here:






    Any questions? Please do not hesitate to contact me.
    Last edited by JoeBoomz; 09-14-2014 at 10:31 PM.

  2. #2
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

  3. #3
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

  4. #4
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

  5. #5
    Join Date
    Apr 2009
    Location
    North Atlanta
    Age
    41
    Posts
    1,504
    FML

    This is a good ass deal
    Quote Originally Posted by Juice View Post
    I daily drive mine because I love driving it. I'm not going to spend most of my time behind the wheel in some piece of crap when I could be enjoying every minute of it. If somebody runs into me, so be it. I'll get something else and move on.
    I think cars should be driven, not kept in garages their whole life. If you want to collect something, collect stamps.

  6. #6
    Join Date
    Mar 2011
    Location
    7 Cities Va...The Beach
    Posts
    178
    ****!!! I wish you took lay-away payments!!!

  7. #7
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

  8. #8
    Join Date
    Mar 2014
    Location
    oakland
    Age
    43
    Posts
    15
    Is this all the parts for the swap and how much for shipping? Oakland Ca 94605

  9. #9
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088
    Quote Originally Posted by Will 1981 View Post
    Is this all the parts for the swap and how much for shipping? Oakland Ca 94605


    Depends how you decide to run the alternator, but this gets you most of the way there. You will need an aftercooler, pump and tank for the eaton as well to redo your radiator piping. I'd review the eaton swap threads to be sure. You will also spend time rewiring your harness but I will include the cobra harness for the plugs you need.


    Shipping will likely be above 100. But I will get you an actual quote shortly. Still have to figure out how many boxes and what size in order to keep the weight down.
    Last edited by JoeBoomz; 09-12-2014 at 11:18 PM.

  10. #10
    Join Date
    Mar 2014
    Location
    oakland
    Age
    43
    Posts
    15
    How do I send a pm

  11. #11
    Join Date
    Mar 2014
    Location
    oakland
    Age
    43
    Posts
    15
    Sent you a pm

  12. #12
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088
    Updated first post:

    UPDATE SEPT 14: Here's some more pics of the parts, I took these to post it on eBay.


    Note, that's an actual K&N CAI.

    SAVE ON SHIPPING - if you don't need or won't use some of the heavier pieces like the starter, AC compressor, alternator, Cobra Exhaust manifolds, EGR tube, let me know and I won't ship them. They add a ton of weight and those parts alone will probably cost another $100 to ship.




    Full Cobra engine harness, you'll need some of these plugs to get everything going in your Marauder.






    And the rad hoses and thermostat, don't know if they'll be much use to someone installing this in Marauder, but there you have it.




    The Cobra timing cover is also included, exactly as shown here:




    I'm at 2200 firm, plus shipping. This is a good deal for the hardware with a video of it running.

    Buy with confidence - I have perfect feedback on eBay (user JoeBoomz) and have never had a deal go bad on mm.net. (knock on wood)
    Last edited by JoeBoomz; 09-14-2014 at 10:31 PM.

  13. #13
    Join Date
    Mar 2014
    Location
    oakland
    Age
    43
    Posts
    15
    Ill take it

  14. #14
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

  15. #15
    Join Date
    Apr 2010
    Location
    Western Canada
    Posts
    1,088

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. For Sale New prices Eaton swap misc goodies / cobra parts w pics
    By clintons4 in forum Marauder-specific Parts for Sale
    Replies: 10
    Last Post: 01-22-2014, 09:00 PM
  2. For Sale Eaton Swap Parts, Coils, Springs, Stock Parts, COP Harness, Lunar Gauges ETC!
    By 351carlo in forum Marauder-specific Parts for Sale
    Replies: 17
    Last Post: 01-01-2013, 09:48 AM
  3. For Sale Not mine-03/04 cobra eaton swap parts $2500
    By Comin' in Hot in forum Other Parts for Sale
    Replies: 12
    Last Post: 07-13-2012, 03:40 PM
  4. For Sale Eaton M112, Cobra TB, Cobra Heat Exc
    By mgmsleeper in forum Marauder-specific Parts for Sale
    Replies: 5
    Last Post: 01-14-2012, 11:45 AM
  5. trilogy eaton vs cobra eaton
    By ImpalaSlayer in forum Power Adders
    Replies: 22
    Last Post: 10-02-2009, 05:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •