Done. 5k everything lol
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
Link discussing the importance of either retrofits or using projector housings when upgrading to HIDs
http://southrnfresh.com/2013/06/why-...s-you-a-ricer/
2003 300A #5377 130,XXX Miles
Drilled and slotted rotors from Ebay
JLT
Stainless Works Long Tube Headers and 3" catback.
Mo's Tune
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
I've had 6000k in both my Grand Marquis and the Marauder. I will say the GM scatters way more light than the Marauder. I blame the all-chrome housings on the Marquis for this. I don't think it's as bad in the Marauder to have HIDs in the halogen housings, I just can't stand the dirty light pattern emitted since I have projectors on my motorcycle with such a clean cutoff.
-----------------------------------------------------------------------------------
'04 Marauder #357 of 3213 - Built and Eaton swapped - "MERCD"
'21 F150 XLT 5.0 Sport
'18 Chevy Malibu Redline
'15 Mustang GT, performance package
'01 BMW 740i M-Sport, manual swapped
'97 Lincoln Town Car (black on black)
'10 Harley Ultra Limited
'08 Kawasaki ZX6R
'03 Grand Marquis(sold)
Guys, how hard is it to install/remove HID's? Im not educated on electrical stuff... The car that I'm looking at had HID's but was later removed due to one of the ballasts going out. However, there are still foglight HID's in it.
“When you can’t make them see the light, make them feel the heat.”
Ronald Regan
"The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."
Lt. Colonel Ralph Peters
“Be polite, be professional, but have a plan to kill everybody you meet.”
"I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
General James Mattis
Put the Retrofitsource kit (5000k) in mine a few weeks ago. Looks great and I'm extremely happy with it.
Black 300A
#888 of 7,838
K&N CAI, SW Long-tube headers, custom X-pipe, Magnaflow mufflers, 4.10's w/ TA girdle, PI Torque converter, trans cooler.
235/50/18F, 255/55/18R, StopTech slotted rotors, Hawk HPS pads, TCE SS lines.
Addco F/R sway bars, Metco U/L control arms, KYB's.
5000k HID's (Retrofitsource); REAL oil pressure, volt, trans temp gauges (Autometer Ultralite II); BC4E dead pedal; SRP Racing pedal covers; hardwired Escort Passport 9500ix.
Tuned @ MO's Speed Shop
296/316
There are currently 1 users browsing this thread. (0 members and 1 guests)