Page 1 of 4 1234 LastLast
Results 1 to 15 of 53

Thread: EATC Repair

  1. #1
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338

    EATC Repair

    As all of you in Atlanta know, when it comes to repairing cars, well I ride the short bus.
    Was wondering if anyone in our breakfast crew is able to do the EATC repair. I got cold air, but it's only coming from the floor and defrost so it looks like my o-rings are fried. Let me know if any of you guys are able to do it and its worth a breakfast and a few bucks towards ya.

    Thanks
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

  2. #2
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    If no one in Atl can do it send it to me. I repair & ship it out the same day I get it.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  3. #3
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    Quote Originally Posted by PonyUP View Post
    As all of you in Atlanta know, when it comes to repairing cars, well I ride the short bus.
    Was wondering if anyone in our breakfast crew is able to do the EATC repair. I got cold air, but it's only coming from the floor and defrost so it looks like my o-rings are fried. Let me know if any of you guys are able to do it and its worth a breakfast and a few bucks towards ya.

    Thanks
    Quote Originally Posted by fastblackmerc View Post
    If no one in Atl can do it send it to me. I repair & ship it out the same day I get it.
    Yeah, bur for YOU Brad, it's gonna cost Big $.

    Last I heard, over 9,000...

    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.



  4. #4
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338
    Quote Originally Posted by fastblackmerc View Post
    If no one in Atl can do it send it to me. I repair & ship it out the same day I get it.
    I'll let you know, if no one can do it here locally, that will be the route I take, hell if youre in South Carolina, I might just have to make a cruise out there.
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

  5. #5
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by PonyUP View Post
    I'll let you know, if no one can do it here locally, that will be the route I take, hell if youre in South Carolina, I might just have to make a cruise out there.
    I live in North Carolina, close to Raleigh.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  6. #6
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    Quote Originally Posted by PonyUP View Post
    I'll let you know, if no one can do it here locally, that will be the route I take, hell if youre in South Carolina, I might just have to make a cruise out there.
    FBM is THE MAN for EATC repairs, FWIW, I'd go that route; quick, cheap, and easy (just the way you like 'em.... ).

    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.



  7. #7
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338
    Quote Originally Posted by SC Cheesehead View Post
    FBM is THE MAN for EATC repairs, FWIW, I'd go that route; quick, cheap, and easy (just the way you like 'em.... ).

    yup, that's how I like em, now I just have to figure out how to get it out, shouldn't be too difficult though.
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

  8. #8
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338
    Quote Originally Posted by fastblackmerc View Post
    I live in North Carolina, close to Raleigh.
    And a shipping I will be. If no one can hook it up locally, I'll pm you for an address and pull it out this weekend for shipping. I'll let you know. Thanks a bunch. just let me know what the charge is and if I go this route I can either send a check with the unit, or hook it up pay pal.
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

  9. #9
    Join Date
    Jan 2004
    Location
    Somewhere in the N.C. Triangle
    Age
    68
    Posts
    26,250
    Quote Originally Posted by PonyUP View Post

    yup, that's how I like em, now I just have to figure out how to get it out, shouldn't be too difficult though.
    To remove EATC:
    Tools: 7mm socket or nutdriver & 10mm socket or nutdriver.
    1. Open passenger side door.
    2. Grasp the center dot matrix trim and pull towards you.
    3. Continue to work the center trim loose all the way to the steering column.
    4. You can unplug the rear defroster switch or leave it connected.
    5. Remove the 4 7mm screws holding the EATC in the dash opening.
    6. Disconnect the 3 electrical connectors.
    7. Remove the 2 10mm nuts holding on the vacuum hose connector.
    8. To reinstall just reverse the removal procedure.
    “When you can’t make them see the light, make them feel the heat.”
    Ronald Regan

    "The only way to deal with the Islamic State - these blood thirsty, blood-drunken, terrorists -
    is to kill them, keep on killing them, until you kill the last one, then you kill his pet goat."

    Lt. Colonel Ralph Peters

    “Be polite, be professional, but have a plan to kill everybody you meet.”
    "I come in peace. I didn't bring artillery. But I'm pleading with you, with tears in my eyes, if you **** with me, I'll kill you all"
    General James Mattis




  10. #10
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338
    Quote Originally Posted by fastblackmerc View Post
    To remove EATC:
    Tools: 7mm socket or nutdriver & 10mm socket or nutdriver.
    1. Open passenger side door.
    2. Grasp the center dot matrix trim and pull towards you.
    3. Continue to work the center trim loose all the way to the steering column.
    4. You can unplug the rear defroster switch or leave it connected.
    5. Remove the 4 7mm screws holding the EATC in the dash opening.
    6. Disconnect the 3 electrical connectors.
    7. Remove the 2 10mm nuts holding on the vacuum hose connector.
    8. To reinstall just reverse the removal procedure.
    thanks FBM
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

  11. #11
    Join Date
    Dec 2009
    Location
    Earth
    Posts
    8,032
    Quote Originally Posted by PonyUP View Post

    yup, that's how I like em, now I just have to figure out how to get it out, shouldn't be too difficult though.
    First, grasp fabric with both hands and twist off of small button. Then grasp tab on zipper and push down.......

  12. #12
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    Quote Originally Posted by fastblackmerc View Post
    To remove EATC:
    Tools: 7mm socket or nutdriver & 10mm socket or nutdriver.
    1. Open passenger side door.
    2. Grasp the center dot matrix trim and pull towards you.
    3. Continue to work the center trim loose all the way to the steering column.
    4. You can unplug the rear defroster switch or leave it connected.
    5. Remove the 4 7mm screws holding the EATC in the dash opening.
    6. Disconnect the 3 electrical connectors.
    7. Remove the 2 10mm nuts holding on the vacuum hose connector.
    8. To reinstall just reverse the removal procedure.
    Quote Originally Posted by PonyUP View Post
    thanks FBM

    So easy, even a Cap'n can do it....


    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.



  13. #13
    Join Date
    Nov 2004
    Location
    Smithfield, Virginia
    Age
    53
    Posts
    19,088
    Quote Originally Posted by tbone View Post
    First, grasp fabric with both hands and twist off of small button. Then grasp tab on zipper and push down.......
    guspech's mating call sounds, muhahahahaaa!!


    ~But, it makes it a lot easier when he is manscaped.~ Haggis
    ~Cool, I can have one of those strangulation orgasms without the strangle.
    WIN WIN!~ Zack
    ~Who needs to stop? I just wanna gooooooooooo ~ -Matt-

  14. #14
    Join Date
    Mar 2009
    Location
    North Aurora, IL
    Age
    49
    Posts
    11,836
    Slurp slurp slurp.......Ahhhhhhhhhhh!!!





    Great quotes!!
    Quote Originally Posted by CBT View Post
    you were too busy getting your ass kicked by cool people because you suck and are a worthless excuse for a human being.
    Quote Originally Posted by CBT View Post
    I'm going to punch you so hard between the legs your going to need a GYNA BO to fix it!!
    Quote Originally Posted by Haggis View Post
    Eat poo poo and die heathen.

  15. #15
    Join Date
    Apr 2008
    Location
    Have ice Bucket, will travel
    Age
    49
    Posts
    6,338
    Quote Originally Posted by guspech750 View Post
    Slurp slurp slurp.......Ahhhhhhhhhhh!!!
    Make sure you gurgle
    <img src=http://www.mercurymarauder.net/forums/image.php?type=sigpic&userid=8954&dateline=1348600468 border=0 alt= />

    Purchased: 12-3-11 from Martyo
    Blown: 2-2-12 Vortech FTW (Installation at Mo's)
    Ice Bucket Blown: 4-14-12 (Louisville)
    New member to MM "Blues Brothers"

    And I'm never to old to try and impress 22 year old girls

    Quote Originally Posted by CBT View Post
    Did I? Oh yeah I guess I did. Sometimes I type too fast and get the A and the S confused, good catch. *******.
    Quote Originally Posted by CBT View Post
    I have survived Haggis Black Death. The next morning I think it dislodged Hamburger Helper that was caught in my guts since childhood. Either that or I crapped out my pancreas.

Page 1 of 4 1234 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. bad eatc?
    By Mike827 in forum Shop Talk
    Replies: 1
    Last Post: 05-07-2011, 09:02 PM
  2. Is there anything else I can do for the EATC?
    By 68Camaro in forum Shop Talk
    Replies: 2
    Last Post: 09-20-2010, 04:08 PM
  3. A/c eatc help
    By Mike827 in forum Southern Marauders
    Replies: 2
    Last Post: 06-27-2010, 06:50 PM
  4. Did the O-ring EATC repair...few questions.
    By 68Camaro in forum Shop Talk
    Replies: 5
    Last Post: 05-14-2010, 07:48 PM
  5. Eatc
    By Georges93LX in forum Shop Talk
    Replies: 1
    Last Post: 09-21-2008, 04:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •