Senior Member
Quick question for those of you that have installed (either yourself or watched the install) the Addco front sway bar. Did you use the plates that came with it?
Ordered the sway bar and it came with bushings and bushing brackets, but not the plates that the instructions says it is supposed to come with.
I installed one on my previous marauder but that was 5-6 years and don't recall whether I used them or not.
Procharged Marauder
I did some work to a marauder over the weekend and I did notice it had the plates,Originally Posted by Black&Gifted
04 twin turbo Marauder custom made by myself 😁
3800stall freddy Brown 4stbe trans 31 spline rear
601rwhp 592rwtq @19psi
Hello?
Yes, I installed the plates when I put on my sway bar.
Senior Member
Alright and thanks. I'm in the process of getting this sorted out with the vendor.
S/C 20" MINI TUBBED WHEEL GUY!
You need the locking collars for the front bar.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Senior Member
And this is an extra purchase.
2003 300A Black, #4918 of 7838, 17,400 Miles
Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium
2003 300B Silver Birch, #21 of 419, 29,800 miles
Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.
2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.
2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)
S/C 20" MINI TUBBED WHEEL GUY!
It shouldn't be, my front addco came with the collars.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**
VISIT MY GARAGE FOR A FULL LIST OF MODS
Sick-Speed play toy
Same.
Sent from my iThrone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Member
Addco has been lacking in customer service lately. I got my front bar, but with the wrong size collars. After about a month they sent me some cheap pot metal collars. I ended up ordering some off amazon.
2006 GMQ, 2010 CVPI
Senior Member
I ordered the bar from summit and they finally connected with addco today after almost a week of trying to get in contact with them. Addco is supposedly shipping out the plates to me...
Can't say enough about summit's CS because they have been in constant contact with me since issue was raised last week.
Sent from my iPhone using Tapatalk
Senior Member
Below are the collars that came my sway bar. Do they go on the inside or outside of the bushing...the instructions didn't mention them nor did the install write up I saw mention them (I assume on the inside but please be gentle on me)?
Sent from my iPhone using Tapatalk
Last edited by Black&Gifted; 10-25-2016 at 11:31 AM.
S/C 20" MINI TUBBED WHEEL GUY!
They go on the inside of the bushings.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**
VISIT MY GARAGE FOR A FULL LIST OF MODS
Senior Member
Well, it's been 2 months and the plates have not shown up. In fact, summit contacted addco twice after the fact, and each time summit said they were sent out "a while back" but they would send another set. Unless there is someone in my neighborhood that is collecting these as they are delivered to my door, I don't believe summit ever sent them. Never had any issue with packages disappearing, and had a bunch delivered over the last 2 months.
Any issue if I don't install the plates?
Sent from my iPhone using Tapatalk
the grundle always gets ya
I went over a year and a half without the plates installed with hard driving during that timeframe. I got around to putting them on and nothing had happened with no difference in the feel of the car. But it would be better to have them.
300A Black
4:10 gears, Flowmaster 44's with rear cat delete, SW headers with 3 inch cats to 2.5 custom h. 3500 stall, Twisted synergy dyno tune, addco f/r , rear control arms, Novi 1200 air to air with the fixings.
Weißbirke Plünderer
call addco direct
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
