anybody running 305-35-20 tires?

[Dude]

I'm looking to get some new 20" wheels for my marauder. 8.5" front with a 255-35-20 and 10" rear with the 305-35-20. Anyone running this combo?

[MOTOWN]

Im running 305 35/20s on the fronts which are 20x10s , and 305 50/20s on the rear on 20x11.5

[ChiTownMaraud3r]

I'm looking to get some new 20" wheels for my marauder. 8.5" front with a 255-35-20 and 10" rear with the 305-35-20. Anyone running this combo?

This sounds like the combo I'll be running next year. Please post pics if you get this.

[Dude]

Im running 305 35/20s on the fronts which are 20x10s , and 305 50/20s on the rear on 20x11.5

Wow. Can you post pics or even better text me some? What offset wheels are you running? (602) 796-6099.

[Dude]

This sounds like the combo I'll be running next year. Please post pics if you get this.

Will do. Just hard to spend the money being unsure if they will fit. I'm trying for the fr500 wheels in machined with black windows.

[MOTOWN]

Wow. Can you post pics or even better text me some? What offset wheels are you running? (602) 796-6099.

Done! wheels are +40mm offset

[ChiTownMaraud3r]

I'm sure they will fit, I used a couple calculators like this one, To make sure the overall diameter is near stock.
http://tire-size-conversion.com/tire-size-calculator/

It says 305/35/20 is .07% shorter than stock. or .2"... close enough in my book.

The fronts you will have to play around with as I think there may be a better size to closer match stock size.

[Dude]

I already did the math. I'm good on height. Its the wheels im worried about. Correct offset.

[ChiTownMaraud3r]

I already did the math. I'm good on height. Its the wheels im worried about. Correct offset.

Ah. Just stick to anything +35mm and greater.

[Dude]

Lol. The fronts are 8.5 with a +30 mm

[MOTOWN]

Ah. Just stick to anything +35mm and greater.

It depends on the width also a +35mm 20x10 will stick out 2" past the wheel well.

Been there tried that! here is a pic of a +35mm offset wheel it stuck out 2" past the fender lip, Needless to say I sent it back for +40mm offset wheels.

[ChiTownMaraud3r]

It depends on the width also a +35mm 20x10 will stick out 2" past the wheel well.

Been there tried that! here is a pic of a +35mm offset wheel it stuck out 2" past the fender lip, Needless to say I sent it back for +40mm offset wheels.

Yeah good call. Most staggered setups come in 8.5" for fronts though. I think 10" front rim is too much.

[MOTOWN]

Yeah good call. Most staggered setups come in 8.5" for fronts though. I think 10" front rim is too much.

Not in the right offset!

[svtrichie]

Im running 305 35/20s on the fronts which are 20x10s , and 305 50/20s on the rear on 20x11.5

3055020, I would like to see how it looks. That tire is extremely tall at 32 inches.

[MOTOWN]

3055020, I would like to see how it looks. That tire is extremely tall at 32 inches.

I just got the rear wheels widened to 11.5" so its around 30" and the sidewall is flat , which is exactly what I was looking to do , this pic is before the rears were widened.