Post Marauder Mod Disorder
The wait is over. I am the owner of 6 piston, monoblock Brembo brakes.
Front 15" rotors: Wilwood SRP Drilled Performance Rotor $369.00 / ea
Rear 14" rotors: Wilwood SRP Drilled Performance Rotor $330.00 / ea
Front and Rear calipers: Brembo GT 6 piston monoblock eBay or online Brembo dealer. $650 - 900 for two
Brembo calipers I have installed: Front and Rear
Wilwood Master Cylinder: [URL="https://www.wilwood.com/mastercylinders/MasterCylinderProd?itemno=261-13270-BK[/URL]
Last edited by Lowndex; 04-17-2019 at 03:16 PM.
Senior Member
Oh my! Me like
Post Marauder Mod Disorder
The mounting hardware came out of the blocks of billet aluminum. I will post finished pictures late next week or the week after - a side view of both front and rear Brembo brake kits.
Senior Member
Any idea of the ballpark the whole kit will run? Front and back?Originally Posted by Lowndex
Post Marauder Mod Disorder
I do not know. Email KC and share what you learn.
kc@brgracing.com
Weißbirke Plünderer
These need 20" rims to run at the size he had made..Have to check with KC, the fabricator, about possible 18" sets.
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Senior Member
$$$
Sent from my iPhone using Tapatalk
S/C 20" MINI TUBBED WHEEL GUY!
Just curious, the picture you share is a picture of the rear brakesThe wait is over. I am the owner of 6 piston, monoblock Brembo brakes.
Fronts are done; rears this week. Want a set yourself? You know who to contact.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Senior Member
Just curious, the picture you share is a picture of the rear brakes
good catch, lolol
Turbo Marauder
I'd conservatively guess 5k for the front and rear package
Sick-Speed play toy
Looking closely at that pic it appears they cut down a slotted rotor and bolted a rotor ring to it??
You guys seeing the slots to the left of the top bolt?
Sent from my iThrone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Post Marauder Mod Disorder
After making the 20" brake hats and mounting hardware, KC is ready to make 18" parts.
Post Marauder Mod Disorder
Did I get my pictures mixed up?Just curious, the picture you share is a picture of the rear brakes
Post Marauder Mod Disorder
No, not anywhere near that amount. You are buying brake hats and mounting hardware only. You may purchase the rotors and calipers yourself. That was the whole point.
Weißbirke Plünderer
I think maybe he meant with purchasing rotors and calipers, not just KC's fabrication work..by the time one buys all that is needed
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
