Results 1 to 11 of 11

Thread: 02 mustang gt 32v swap 03 MM

  1. 06-14-2016, 04:04 PM #1
    THRrider
    THRrider is offline Junior Member
    Join Date
    Jun 2016
    Location
    brewton/Al
    Posts
    4

    Angry 02 mustang gt 32v swap 03 MM

    Im kinda new but I have a 02 mustang gt with the 03MM motor. With mach 1 upper&lower intake manifold Jlt cold air intake with Lt headers..with an mild tune 4r70w..4:10gears coming soon...

    I raced a charger r/t yesterday beat it by a fender.I know the charger runs 8.9s threw the 1/8th but we was on the street . but i know MM has way more power than that...where can I find a great E-mail tuner don't really have a lot of time to go to a dyno I live 600 years away from the nearst one...what other upgrades should I add thinking about adding a zex wet kit how big of a shot should I go with..
    what RPMS I should spray at ...what other upgrades do i need ?? Or should have ....would ah intake spacer help....idk i need help
    Reply With Quote Reply With Quote
  2. 06-14-2016, 05:29 PM #2
    RubberCtyRauder's Avatar
    RubberCtyRauder
    RubberCtyRauder is offline Weißbirke Plünderer
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    how far from northwest Atlanta? dyno, email, speed shop tuner right there, right on here. Mo's speed shop. Dallas, GA
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"
    Reply With Quote Reply With Quote
  3. 06-14-2016, 06:25 PM #3
    Turbov6Bryan's Avatar
    Turbov6Bryan
    Turbov6Bryan is offline I miss whitey here
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,518
    Quote Originally Posted by RubberCtyRauder View Post
    how far from northwest Atlanta? dyno, email, speed shop tuner right there, right on here. Mo's speed shop. Dallas, GA
    600 years away foo!

    Just get with Mo and do a 100 shot and tune.

    Get good rods and pistons, go with a 300 progressive and nano for the street.

    Put your mustang on a diet
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread
    Reply With Quote Reply With Quote
  4. 06-15-2016, 06:13 AM #4
    Catfish's Avatar
    Catfish
    Catfish is offline Senior Member
    Join Date
    Feb 2016
    Location
    Fleming Island, FL
    Age
    50
    Posts
    238
    Good to hear you beat a Charger. Just make sure you know what the "Hellcat" emblem looks like. If you see one on the side of a Charger or Challenger just wave and make a right turn. +1 on Mo's Speed Shop. They have a lot of experience with our motors.
    Reply With Quote Reply With Quote
  5. 06-15-2016, 06:55 AM #5
    Spectragod's Avatar
    Spectragod
    Spectragod is offline Willing to meet up half way
    Join Date
    Feb 2007
    Location
    over here, with the 40's of beer.
    Age
    21
    Posts
    9,026
    Quote Originally Posted by Catfish View Post
    Good to hear you beat a Charger. Just make sure you know what the "Hellcat" emblem looks like. If you see one on the side of a Charger or Challenger just wave and make a right turn. +1 on Mo's Speed Shop. They have a lot of experience with our motors.
    You might do this, I find them quite tasty......
    I LOVE Jerry's bar, it's my kinda place...........






    When you are dead, you don’t know you are dead. It is difficult only for others. It is the same way when you are stupid.

    "Chuck Norris built my stock longblock. It runs on the tears of small children and makes 10,000 hp. He said it's his 'street version' "

    Trilogy # 192 / T.S. 0012

    BOOST GETS YOU FELONY STOPPED!!!




    Reply With Quote Reply With Quote
  6. 06-15-2016, 01:28 PM #6
    THRrider
    THRrider is offline Junior Member
    Join Date
    Jun 2016
    Location
    brewton/Al
    Posts
    4
    Quote Originally Posted by RubberCtyRauder View Post
    how far from northwest Atlanta? dyno, email, speed shop tuner right there, right on here. Mo's speed shop. Dallas, GA
    I'm 6 hours away from Atlanta lol idk if #car-name(problem child) uP for that ride lol
    Reply With Quote Reply With Quote
  7. 06-15-2016, 01:49 PM #7
    THRrider
    THRrider is offline Junior Member
    Join Date
    Jun 2016
    Location
    brewton/Al
    Posts
    4
    Ok mo speed shop..will look into it ..yea I know what the heLl cats will do somethung unspeakable BUT ALSO I SEEN A HELLCAT GET KICKED BY AH MARAUDER AT THE TRACK #GAP BAND...MM was supercharged tho lol.....100 shot will be safe to spray on the stock motor ??? trying to get the best out of it be for i go back and pull the engine .........need the ride right now lol only car I got right now....What y'all think about the 98 cobra cams ???
    Reply With Quote Reply With Quote
  8. 06-15-2016, 03:45 PM #8
    justbob's Avatar
    justbob
    justbob is offline Sick-Speed play toy
    Join Date
    Mar 2008
    Location
    Next door to my neighbor
    Age
    50
    Posts
    20,353
    Quote Originally Posted by Spectragod View Post
    You might do this, I find them quite tasty......

    I chuckled at that myself.


    Sent from my iThrone using Tapatalk
    SOLD 12/31/2021

    Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
    Reply With Quote Reply With Quote
  9. 06-15-2016, 04:00 PM #9
    Turbov6Bryan's Avatar
    Turbov6Bryan
    Turbov6Bryan is offline I miss whitey here
    Join Date
    Nov 2014
    Location
    KC
    Age
    48
    Posts
    3,518
    Quote Originally Posted by THRrider View Post
    Ok mo speed shop..will look into it ..yea I know what the heLl cats will do somethung unspeakable BUT ALSO I SEEN A HELLCAT GET KICKED BY AH MARAUDER AT THE TRACK #GAP BAND...MM was supercharged tho lol.....100 shot will be safe to spray on the stock motor ??? trying to get the best out of it be for i go back and pull the engine .........need the ride right now lol only car I got right now....What y'all think about the 98 cobra cams ???
    The cams make what 10 rear wheel horsepower? Thats AFTER buying the tools to degree them correctly, and a full days work/ maybe the entire weekend to do it correctly.

    Mo will let you know how much nitrous you can use, 100-125 is max on stock rods and pistons
    The twins2.3 whipple/aluminatorVortech V-2 lots of goodies

    Current marauders
    04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg

    04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
    04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
    04 Silver Birch Dark Charcoal Converted
    03 DBP Light Flint #122
    03 DBP Dark Charcoal #232
    03 Silver Birch 300b Light Flint Going to fix er up
    03 Black 300a
    04 Silver Birch Dark Charcoal moonroof in the works

    04 Heaton Swapped DTR
    Joe's Wrecked DTR rebuild thread
    Reply With Quote Reply With Quote
  10. 06-15-2016, 04:24 PM #10
    martyo's Avatar
    martyo
    martyo is offline MO derator
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Feel free to message me if you want to discuss any of this.
    Reply With Quote Reply With Quote
  11. 06-15-2016, 10:41 PM #11
    THRrider
    THRrider is offline Junior Member
    Join Date
    Jun 2016
    Location
    brewton/Al
    Posts
    4

    Post

    What type of numbers y'all running in the 1/8? What type of stall would be best for a 4r70w...
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Mustang Cobra Eaton Swap deals...
    By sflrainmaker01 in forum Power Adders
    Replies: 31
    Last Post: 11-27-2013, 08:31 PM
  2. 33rd Annual Mustang & All Ford Car Show & Swap Meet in Indianapolis
    By j21moss in forum Events
    Replies: 1
    Last Post: 06-17-2012, 06:52 PM
  3. 29th Annual Mustang & All Ford Car Show & Swap Meet in Indianapolis
    By j21moss in forum Events
    Replies: 10
    Last Post: 12-22-2008, 06:40 PM
  4. 1998 Mustang motor swap
    By ctrlraven in forum The Lounge
    Replies: 8
    Last Post: 01-11-2007, 09:26 AM
  5. air intake swap - mustang mach 1 on Marauder
    By ghostship55 in forum Shop Talk
    Replies: 16
    Last Post: 04-24-2005, 12:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules