Results 1 to 10 of 10

Thread: Need help with codess

  1. #1
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18

    Need help with codess

    I am having trouble with my marauder jerking(sort of misfiring) when pressing the gas pedal, mostly when I really press it. Its interesting because it jerks under light load when I fill up my gas tank every week.

    Anyhow I've taken it to my local mechanic who after numerous tests told me the catalytic converters especially on the right side rattled when hit. They concluded those should be replaced.

    I had to take my car to another place because they didn't weld. Upon arriving at the weld shop they tell me there are codes from the check engine light responsible for causing this issue vice faulty catalytic converters. They told me I have to replace mass air flow sensor and possibly 02 sensor. 02 sensors are relatively new. The codes that appeared were p2195, p2197, p0113 and p0102. I cleared the codes and now after driving only p0113 and p0102 are showing.

    These codes have been there since I installed my headers about 2 years ago. I started having this jerking problem after those codes appeared. I think the problem lies with something else, possibly the catalytic converters. I've driven the car with the MAF plugged in and unplugged but the car still jerks. So one can deduce that the MAF isn't the problem. Does anyone have ideas what could be the problem? Could it be the fuel pump or fuel injectors? Any help would be greatly appreciated. Thanks.

  2. #2
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Is your car tuned?

  3. #3
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18

    code help reply

    Yes i do have a tune. U think that could be the problem?

  4. #4
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by jh18053 View Post
    Yes i do have a tune. U think that could be the problem?
    Did the problem start before or after the tune?

    Do you have an Xcal3 or 4?

  5. #5
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18
    Definitely after the tune. i have the xcal3.

  6. #6
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Did you install a CAI on this car?

  7. #7
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18
    Yes sir that is correct. K&N CAI installed about 4 yrs ago. I spent Friday afternoon cleaning the filter, but still having the hesistation problem.

  8. #8
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18
    Marty could i call you so we can discuss?

  9. #9
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by jh18053 View Post
    Marty could i call you so we can discuss?
    Today I am jammed because I started my day at the doctor and the shop is swamped today.

    Call me tomorrow - my cell is (914) 582-6262 or you can try the shop phone (770) 222-5015

  10. #10
    Join Date
    Mar 2011
    Location
    Fort Washington, MD
    Age
    35
    Posts
    18
    Sounds good ill call tomorrow.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •