Hi,
I am going to have to replace my radiator....Can the radiator come out alone or does the AC condensor need to also come out?
Steve
Hi,
I am going to have to replace my radiator....Can the radiator come out alone or does the AC condensor need to also come out?
Steve
The radiator will come out alone, or with trans and power steering coolers attached.
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
thanks..........
I am going to need a new radiator... Should I only use a Ford Part and stay away from aftermarket?
04 MERCURY MARAUDER build date:02/11/04ITS ALIVE !!!!!!!!
STAY TUNED!!!!!!!!!!
**WHIPPLE 4.0L CRUSHER!**0000 (FOR NOW) RWHP
VISIT MY GARAGE FOR A FULL LIST OF MODS
Made an attempt to take out the radiator. there are metal brackets on the AC condenser that slip into plastic holders on the radiator. the radiator must have went in first the the condenser to follow. I do see screws on the metal brackets on the AC condenser but should those come off? Looks almost impossible to get at them.
Your help is appreciated.
It's a PITA but it can be done.
Thanks to Darrin @ BC Automotive:
$1800 and it was worse than when he started!
Brian (FordNut) FPG # 1458 of 7838
03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
then 476/410 D1SC ProCharged on stock block
then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker
03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
01 F150 longbed
01 F150 shortbed
00 F150 4x4 stepside
01 F150 4x4 7700
68 Stang FB (70 351C 4V, 4 wheel discs, project car)
Mods listed here (some items not current): FordNut's Mods
Well I did get it out... but it is a PITA......Boy, Ford really does have a BETTER IDEA.....NOT.......
Looks like a small pin hole in the radiator caused by the fan shroud....another great IDEA by Ford.....
Remember at Ford, Quality is Job #1.......
These cars are now thirteen years old and most have well over 100,000 miles. Things wear no matter who built it.
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
I replaced mine two years ago w/one from rock auto.
Just replaced the A/C condenser last week - PITA both times!
SOLD '03 300A Black - "805" of 7838
Plate - "EVILMERC"
I won't be wronged. I won't be insulted. I won't be laid a-hand on. I don't do these things to other people, and I require the same from them.
Gillom Rogers: [Books is giving Gillom a shooting lesson] Mr. Books, How is it you've killed so many men? My spread wasn't much bigger than yours.
John Bernard Books: First of all,friend, there's no one up there shooting back at you. Second, I found most men aren't willing, they bat an eye, or draw a breath before they shoot. I won't.
I replaced mine with a 3" Summit one. But it got relocated to fit so probably doesn't count.
Builder Of Badassery
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Was the hole towards the bottom of the radiator? Before the summer minded the same thing. It looked like the fan shroud warped causing it to rub against the radiator fins.. I shaved about 1/8" off the lower part of the shroud so it would not happen again. Got a new OEM radiator from Ford for $300 wholesale, and they told me it was going to be obsolete soon.
'98 MGM LS...sold..................... .............................. ..'03 300A...sold 6/17
There are currently 1 users browsing this thread. (0 members and 1 guests)