I know some may say why did I do this. Will I want to do away with the screw type. To me the Power Grip look better. And yes Curless did some first. And yes they do cost more but you can do some shopping around.
Senior Member
New Hose clamps (Power Grip)
I know some may say why did I do this. Will I want to do away with the screw type. To me the Power Grip look better. And yes Curless did some first. And yes they do cost more but you can do some shopping around.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Super Touring
Looks good, much cleaner. What size did you use for the COT hose?
2021 F150 XLT Super Crew short bed - no chrome! - 3.5 Ecoboost 400hp/500tq - 36 Gal tank (600 miles) - 4x4 FX4 Offroad + Max Tow - 3.55 Locker - 10 Speed - Pro Power 2kva - 24mpg @ 80 Ford is still the best.
03 300A - Number 1727 - Super Touring - 10k in the best upgrades - 13.8@99 N/A - SOLD- STAP was so much fun, loved meeting you all and racing.
GAME OVER, YOU LOSE!
Can you post a close-up shot of the clamp. Black clamp, black hose = HTS, at least on my old screen. Thanks
Senior Member
Ditto..............
Born 03/04
Adopted on 01/03/05
2084 of 3213 & 691 of 983____Moonroof 185 of 335 of 1213
Now Procharger boosted #04
MO derator
Bob how are these removed?
And do they need to be heated from all around to get them to hold?
T242 - Ricer ricer
1 time use Marty. Remove with slitting tool - watch video.Originally Posted by martyo
Pretty cool. No more cold coolant leaks (not that you southern boys would have to deal with that PITA)!
Product link: http://www.gates.com/products/automo...grip-sb-clamps
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
MO derator
Fantastic post.
Anyone have a best place to get them and the removal tool yet?
T242 - Ricer ricer
For clamps - Amazon to start:
http://www.amazon.com/Gates-32925-Po...4F6VNTEP7HCX65
Working on tool yet.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
T242 - Ricer ricer
Jegs so far.
Tool at bottom of page: http://www.jegs.com/p/Gates/Gates-Po...43359/10002/-1
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Senior Member
Looks like Jegs has the clamps and the removal tool.
Excess in Moderation.
Sprinkles are for winners.
T242 - Ricer ricer
Lots of places have the clamps so far, even Oriely.
Jegs is only place I've found tool so far.
WLB
BB#1) 1996 ImpalaSS - 16,500 miles - 100% stock
______________________________ ___________
BB#2) 2003 Marauder (300a) - 34k miles - Daily Driver
#2912 of 7093
Conceived 8/6/2002
Delivered 9/19/2002
Adopted 8/10/2011
Trilogy 242 - Self Installed 9/9/12 (0-60 5.5 sec)
Pioneer 6x8 Front
Legacy 600w 6x9 Rears
JL 6.5 SubWoofer
K&N CAI
Window tint 50% rear/35% front
FBM CHMSL with Strobe mod 7/1/12
DR Deep Aluminum Trans Pan
Sparta FOMOCO Racing 8.8 Girdle
Mo's Dyno Tune
Gorilla Nuts - The System
Ford Racing 4.10s, 31 spline Cobra carrier & axles 7/1/12
Powder Coat Axle Housing 7/1/12
CME HP Rear Control Arms & Watts Link 7/1/12
______________________________ ________________
Rex "SC Cheesehead" Weinbender 11-14-13
Ed "Baaad GN" Linthicum 8-6-2014
Senior Member
I got mine from ZORO can by them cheaper than anyone I could fined. Now WirCare.com is all so a good place. My local parts store could all so get them at a good price but had to buy a box of ten at a time. They are a one time use. I used a heat gun and got it around as much I could and ran it on high. I just took my time and got the heat as much around the clamp. So fare went for a good drive and every thing is good no leaks.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Senior Member
I will move the car out and take a better picture.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Senior Member
Here is what I replaced heater hose from the side pipe and all the line going to and from my S/C reservoir P/N 32925.
The three COT hosed at the tube only P/N 32941.
Rad hose from the COT to the rad. P/N 32948.
Did not replace the bottom ones yet.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Super Touring
cool thanks for part numbers
2021 F150 XLT Super Crew short bed - no chrome! - 3.5 Ecoboost 400hp/500tq - 36 Gal tank (600 miles) - 4x4 FX4 Offroad + Max Tow - 3.55 Locker - 10 Speed - Pro Power 2kva - 24mpg @ 80 Ford is still the best.
03 300A - Number 1727 - Super Touring - 10k in the best upgrades - 13.8@99 N/A - SOLD
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
