Senior Member
Got my lines today and they look great stuff. Calipers just got to the house. I all so just ordered the rotors front and rear. Get them Friday. Bad part is I have a yearly car show this weekend. Look's like the end of the month. But that's ok want to paint the calipers.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Senior Member
Got my front and rear rotors. Calipers are painted now just need some time to do the install.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Senior Member
am i too late the party or can i get these too?
Junior Member
Hey everyone. I'm new, but I have been lurking for awhile. I have an 03 MGM, but I'm upgrading it with the intent of putting a 5.4. I have all of my suspension done, just waiting for my brackets to arrive! I'm jacked!
Supporting Vendor
I will check the shelf Monday and see what's left.Originally Posted by MarauderMatt200
Those were the days.........
DANG THEY'RE CUTE!!!!!!
Smile and Nod
I love THIS bar
Member
I'd also be interested in a set of brackets.
Supporting Vendor
One set left.............
DANG THEY'RE CUTE!!!!!!
Smile and Nod
I love THIS bar
Senior Member
Dust shields or not?
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Member
PM sent for brackets
Member
Here are the parts prices from a local wholesaler:
2010 Mustang GT500 rotors: $90ea Napa with discount $58.50
2004 C5 Corvette Calipers (no wording) $81.99 + $75 core each Napa with discount $73.79 each +$66.67 core
Severe heavy duty pads: $50
These are all Centrix parts.
Last edited by BLACKMARAUDER04; 05-01-2015 at 11:24 AM. Reason: CHANGES
300B
I didn't remove mine
2003 Black/Light Flint MM, PROCHARGER D1SC#30, 4.10 GEARS, REAR COOLING MOD, ZACK BIG BRAKE KIT, 3500 STALL, WIDENED REAR WHEELS.
1993 MUSTANG LX HATCH, 347 STROKER, 3.73 GEARS, TUBULAR K MEMBER, TKO 3550 TRANNY, AEROSPACE DUAL PISTON BREAKS.
The Original Hellcat.
Neither did I.
Name: Bruiser.4 doors - no waiting.2004 Mercury Marauder, BLACK w/Charcoal.Built 09/04/03#261 of 1236 Blacks, 3213 total for 2004(Thanks RoyLPita)Purchased 10/23/2003Adopted 04/25/2004
Hot seats, 6 disc, trunk org, spoiler, avic f90bt & xm, ts-d802 speaks, bumper inserts, pedal and sill covers, 23% tint, 8000k hi/lo hid's & fogs, pro-guard, c.a.i., Xcal2, u.d. pulleys, emp pump, 180 t-stat, autolite 103 plugs, cop connects, coil covers, converter, aluminum pan & cooler, intake spacer, 4.10's, girdle, sway bars, control arms, head cooling kit, shorty headers w/ x pipe, dead pedal, budget big brakes.
"Come with me if you want to live".
Senior Member
I have started to install the new brakes and went ahead and removed them. I may try and make some new ones that will be bigger. Not to worried I do not drive it much and sure not in the rain unless I get caught in it.
03MM 300A Build date 06/03/02 Production #446Tilogy S/C Kit#4 387RWHP 364RWTQ, Addco front and rear sway bars,Factory Spoiler,Auto,Auto Meter Gauges ,Boost,Air/Fuel,Trans. Temp. Oil and Volt. All are real working gauges now.Badgeless Grill,J Mod
Metco D/S Loop,Boxed Lower Rear Control Arms
New Made Upper Rear Control Arms
Boxed Watts Link,Ford Finned Rear End Cover
Colex Caps: Oil,Water,Enter Cooler,Power Steering,Master Cylinder and Windshield Washer
Daniels Coil Covers and Buttons,Nitto 255/45 front
Widen Rear Wheels with 295/45 Nitto's,Zack's Big Brakes, Rear Drilled a slotted rotors,TCE Braided brake lines,Pro Guard Skid Plate,Summit trans pan, New Exhaust.K&N Cold Air Intake,JLT Catch Can,fastblackmerc door seal plates, pedal covers and Mustang dead pedal.
Member
NAPA has a 10% discount going thru Wednesday 4-29-15 .
http://www.napaonline.com/Savings/Cu...rveOnline.aspx
Last edited by BLACKMARAUDER04; 04-29-2015 at 11:38 AM.
Senior Member
I'm still working through this thread, so maybe this has already been answered.
What's the grade of the aluminum these are manufactured from?
There are currently 7 users browsing this thread. (0 members and 7 guests)
Posting Permissions
Reply With Quote