Results 1 to 7 of 7

Thread: Eatc repair??

  1. #1
    Join Date
    Sep 2011
    Location
    florida
    Posts
    17

    Eatc repair??

    Found a place in minnesota that repairs EATC units for 125.00...lifetime warranty..is there more to it than the o rings that get replaced or electronic repair needed in these to work correctly..currently getting code 024 blend door failure or short...blows hot air out of defrost but if i run diagnostics before hand i get cold air for about 15-20 seconds than it switches to hot air and stays..it wont let me lower temp or change vent position...seems like its a huge problem (faulty EATC)..it is currently making a tapping noise behind glovebox while car is on like the acutator is trying to open or close flapping door..My question is if it was the blend door or the acutator being bad would it still make that noise...was told to try EATC repair first...this guy in minnesota does a boat load of these and tells me this is problem with ford..reading all these post have me confused on my issue..any clarification would be most helpful..nice to know you get straight answers and not BS on this forum..thx everyone for your input...if EATC repair needed would like to give business to someone on forum instead of sending to minnesota (wheres Minnesota??)

  2. #2
    Join Date
    Apr 2009
    Location
    florida
    Posts
    650
    Pm fastblackmerc. He does them also. Where in Florida you from?

  3. #3
    Join Date
    Sep 2011
    Location
    florida
    Posts
    17
    Jupiter..east coast

  4. #4
    Join Date
    Apr 2006
    Location
    Smyrna, DE
    Age
    72
    Posts
    1,785
    Quote Originally Posted by napolitano View Post
    Pm fastblackmerc. He does them also. Where in Florida you from?

    Ditto. He's the guy to go to.
    2004 MM (Black) #112 of 3213 (SOLD)

    2022 Ford Ff-150 SuperCab Iconic Silver "Powerboost"
    3.35 L 4X4
    -AND-
    SLAYER1
    formerly owned by "Impala Slayer!! 2004 SB MM
    Kenne Belle 2.8 (Liquid Cooled), MMR "Boss 302" Block, L&M Engines rebuild Kooks Headers and cats, Accusump Pre-Oiler Dynamax VT mufflers, MBS 2 1/2" exhaust, 4.10's, 2800 stall, Argento 312 "Color" Powder coated wheels, Rears widened 1 1/2 "703
    702 RWHP/653 RWTQ @ 21 Lbs. Boost, M/M catch can, 3 pillar gauge (Boost, Fuel, air intake and coolant temp, custom console cover, S-55 treatment etc...

  5. #5
    Join Date
    Apr 2003
    Location
    Kansas City
    Posts
    934
    I would say either do the orings yourself or have fastblackmerc do it for ya (as that can be done very easily and very cheap) then if that doesn't fix it (which I suspect it won't fix everything) then it looks like maybe a blend door actuator replacement is also in your future.
    Black 2003 300A Marauder Build Date 06-02 100K Miles
    Bought used 05/07/11

    HID Morimoto Mini Projector Headlights (built myself), HID Morimoto Matchbox Projector Foglights, Pioneer Z140BH Headunit w/Pioneer 3 way speakers, XM Radio, backup cam, GMRS radio installed, LED backlit gauge cluster, tint, McGard & Gorilla locking lugs (all of them), Cooper RS3A tires, dead pedal, 4.10s, MO's Tune, 3" Fuel Filter.

    00 White CVPI (KTA Car)

    1995 Chevy Suburban K1500

  6. #6
    Join Date
    Apr 2004
    Location
    Greenville, SC
    Posts
    22,513
    Fastblackmerc is the man, and he gives a lifetime warranty on his work as well.

    2003 300B DBP
    Build date: 6/19/03
    Number 7,792 of 7,838 - 326 of 328
    Proud member of the MM "BLUES" Bros.
    Purchased: 11/10/05
    Eaton swap by ImpalaSlayer 11-09-10

    Semper et in Aeternum, Mercurius.

    In Memory:
    2004 DTR
    Build Date 01/27/04
    Purchased 04/04/04
    Wrecked 10/19/05, R.I.P.



  7. #7
    Join Date
    Sep 2011
    Location
    florida
    Posts
    17
    any blend door actuator replacement instructions with pics available?...what tools will be needed??..thanks everyone!!..its support like this that makes owning these cars alot of fun!!!!!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. EATC Repair
    By fastblackmerc in forum Marauder Innovations
    Replies: 25
    Last Post: 06-18-2015, 04:43 AM
  2. Shout out for LCM & EATC repair
    By HEAVY HITTER in forum Community Discussion
    Replies: 4
    Last Post: 07-28-2011, 10:14 PM
  3. EATC Repair
    By PonyUP in forum Southern Marauders
    Replies: 52
    Last Post: 06-28-2011, 06:13 PM
  4. Did the O-ring EATC repair...few questions.
    By 68Camaro in forum Shop Talk
    Replies: 5
    Last Post: 05-14-2010, 07:48 PM
  5. Eatc
    By Georges93LX in forum Shop Talk
    Replies: 1
    Last Post: 09-21-2008, 04:36 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •