Page 1 of 3 123 LastLast
Results 1 to 15 of 32

Thread: Vortech supercharger

  1. #1
    Join Date
    Jul 2015
    Location
    Bronx New York
    Age
    45
    Posts
    437

    Smile Vortech supercharger

    I want to get a Vortech Supercharger. For my Mercury Marauder. But all I see are kits for Mustangs. And not one for my car. I see one for a 04 Mach 1 Mustang. I don't want to deal with Rynhart crap. I call Pro Charger. And they told me to talk to Dennis at Rynhart Automotive. And I ain't do that. I don't want to run a Eaton or a Trilogy. I was a centrifugal Supercharger. Who know where I can buy one complete.

  2. #2
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    Last edited by Lowndex; 02-12-2016 at 10:50 PM.

  3. #3
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,738
    Be sure you tell ADTR that you heard about them on MM.Net.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  4. #4
    Join Date
    Jan 2006
    Location
    Northern California
    Posts
    2,373
    Quote Originally Posted by 1Marauder View Post
    Be sure you tell ADTR that you heard about them on MM.Net.
    ADTR is not an approved vendor on MM.net. We cannot promote un-authorized vendors.

  5. #5
    Join Date
    Nov 2012
    Location
    Sacramento
    Posts
    3,738
    No one else makes a kit.... Wish there were more choices.


    2003 300A Black, #4918 of 7838, 17,400 Miles
    Tune, KYB's, JLT, FlowMaster 42441, Res Delete, New BFG's, 8 coats of zymoil Titanium

    2003 300B Silver Birch, #21 of 419, 29,800 miles
    Tune, JLT, FlowMaster 42441 Res Delete, New Nitto 235/255 Bigcarsforever dead peddle & custom SRP peddles, 5 coats Zymoil Titanium, Addco front and rear sway bars, KYBs, 1/2 inch coil cut, Sparta Watts link and Control Arms, Carfixer alignment.

    2003 CV Sport Matador Red, 19,280 Miles, DD, Curless Full Service Royal flush, Marto Tune, 18 Chrome Wheels w 235/265 front/back Nitto tires, NEW OEM Sport Springs -1 coil & Monroe Severe Duty (front) shocks, Addco front and rear sway bars, KYB rear Shocks, Carfixer Alignment.

    2004 CV HPP Silver Birch, 93,000 miles. Son's DD, 18 Chrome Wheels w 235/265 front/back Nitto tires (thank you Lowndex!)

  6. #6
    Look in the Supporting Vendor Forum for Mo's Speed Shop. There is a thread where he states he and ATDR have teamed up. Unless something has changed, you should be able get all the info you need.

  7. #7
    Join Date
    Apr 2007
    Location
    48094
    Posts
    2,194
    well. there you. go three options. with ADTR just. what you were. looking fore. keep in mind. that you may. need to upgrade other components. such as trans suspension. brakes too.
    Excess in Moderation.

    Sprinkles are for winners.

  8. #8
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by Lowndex View Post
    ADTR is not an approved vendor on MM.net. We cannot promote un-authorized vendors.
    No but I work with ADTR, sell their products, and tune for them on a regular basis, so if someone like Victor has any questions he can feel free to give me a shout or post questions in my vendor forum.

  9. #9
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by PHHHHTT View Post
    Look in the Supporting Vendor Forum for Mo's Speed Shop. There is a thread where he states he and ATDR have teamed up. Unless something has changed, you should be able get all the info you need.
    Nothing has changed and thanks for pointing him our direction.

    Plus Victor knows me because we are friends and tuned his car.

  10. #10
    Join Date
    Jul 2015
    Location
    Bronx New York
    Age
    45
    Posts
    437
    Martyo my bad I tend to get memory loss. From time to time. Thank you all Lowndex 1Marauder PHHHHTT. And you make alot of sence J-MAN about beefing up the Trans rear end and a good fuel system. Martyo we talked about the Trans converter. And you said 4.10 gears. But I don't want to go that tall. And 373 are a waist of time and money. I will stay 355 just and better axels and a posi. All that is cheap. So I am going to go backward. Or forward and do it all first. Then do the Vortech Supercharger. Martyo to bad you left New York. Because I would of dropped if off. And started it step by step. Being I am going to keep the car. Was thinking about a CTS-V wagon. But there too much for me right now. Plus my DTR. Is clean and worth build it nice. So thanks again fellas. And Martyo I will be in touch with you soon.

  11. #11
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by Red Rum View Post
    Martyo my bad I tend to get memory loss. From time to time. Thank you all Lowndex 1Marauder PHHHHTT. And you make alot of sence J-MAN about beefing up the Trans rear end and a good fuel system. Martyo we talked about the Trans converter. And you said 4.10 gears. But I don't want to go that tall. And 373 are a waist of time and money. I will stay 355 just and better axels and a posi. All that is cheap. So I am going to go backward. Or forward and do it all first. Then do the Vortech Supercharger. Martyo to bad you left New York. Because I would of dropped if off. And started it step by step. Being I am going to keep the car. Was thinking about a CTS-V wagon. But there too much for me right now. Plus my DTR. Is clean and worth build it nice. So thanks again fellas. And Martyo I will be in touch with you soon.
    Sounds good.

    Meanwhile, do a 4.10 so I can so I told you so Victor!

  12. #12
    Join Date
    Jan 2014
    Location
    https://t.me/pump_upp
    Posts
    262
    Quote Originally Posted by Lowndex View Post
    ADTR is not an approved vendor on MM.net. We cannot promote un-authorized vendors.
    Are you serious? There is no other dedicated mercury marauder vendors out there and we can't do adtr?

  13. #13
    Join Date
    Jun 2011
    Location
    Northeast OH
    Posts
    7,999
    Quote Originally Posted by akr619 View Post
    Are you serious? There is no other dedicated mercury marauder vendors out there and we can't do adtr?
    No ****, I promoted a sale on addco sway bars from Jeg's who is also not an approved vendor. Nor is BRG racing, auto anything, carmotorsports, tascaparts.com, Jegs, Kooks, Metco, Addco, Nitto, Discount tiredirect, Firestone, Forgeline, American racing, Sesame street, the muppets, mickey mouse club.

    He is mistaken as they are not here promoting their products, Mo's Speed Shop is taking care of that who is a contributing vendor
    2004 SB Ported Trilogy 48
    Has supporting mods and stuff
    Thanks to Marty O for his help in updating this car.

    R.I.P.
    Rex "SC Cheesehead"

  14. #14
    Join Date
    Jan 2003
    Location
    Hiram, Georgia
    Age
    61
    Posts
    17,780
    Quote Originally Posted by akr619 View Post
    Are you serious? There is no other dedicated mercury marauder vendors out there and we can't do adtr?
    Pay no mind. He is just running his mouth since he does not have a car to run.

  15. #15
    Join Date
    Jan 2003
    Location
    Near Knoxville TN
    Age
    67
    Posts
    10,720
    Quote Originally Posted by martyo View Post
    Pay no mind. He is just running his mouth since he does not have a car to run.
    Thanks to Darrin @ BC Automotive:
    $1800 and it was worse than when he started!

    Brian (FordNut) FPG # 1458 of 7838
    03 MM 300A (Lotsa mods, 130k mi) was 303rwhp/318rwtq N/A
    then 476/410 D1SC ProCharged on stock block
    then 660/555 D1SC PC on 5.3 wet sleeved Teksid alum big bore stroker
    then 365/369 N/A on 5.3 wet sleeved Teksid alum big bore stroker
    Now 751/617 3.4L Whipple on 5.3 Boss5.0 iron big bore stroker

    03 MM 300B Silver (Mostly stock, originally wife's car, 370k mi) FPG # 7053 of 7838 or 49 of 417 SB
    03 MM 300B Silver, Stock, wife's next one, 136k mi FPG # 7134 of 7838 or 89 of 417 SB
    04 MM Silver, Stock, on standby 85k mi, FPG # 1212 of 3214 or 432 of 997 SB
    01 F150 longbed
    01 F150 shortbed
    00 F150 4x4 stepside
    01 F150 4x4 7700
    68 Stang FB (70 351C 4V, 4 wheel discs, project car)

    Mods listed here (some items not current): FordNut's Mods

Page 1 of 3 123 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. d/r vortech supercharger
    By lilmarauder in forum Power Adders
    Replies: 133
    Last Post: 08-01-2016, 05:46 PM
  2. Vortech Supercharger
    By camelgrundle in forum Power Adders
    Replies: 31
    Last Post: 09-18-2012, 01:12 PM
  3. Trilogy supercharger or Vortech supercharger
    By bawazir in forum Power Adders
    Replies: 114
    Last Post: 02-13-2010, 11:13 PM
  4. NON-IC Vortech supercharger
    By Jblue21 in forum Reinhart Automotive
    Replies: 6
    Last Post: 08-13-2007, 05:25 AM
  5. vortech supercharger
    By tmac1337 in forum Power Adders
    Replies: 6
    Last Post: 06-14-2004, 05:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •