Is it sufficient when installing the cross over pipe just cleaning and installing new O rings then seating the pipe or should I also use some gasket sealer ?
Is it sufficient when installing the cross over pipe just cleaning and installing new O rings then seating the pipe or should I also use some gasket sealer ?
2004 marauder black purchased new. Sold 9/16 at 297,000 miles. Still ran strong didn't burn a drop of oil.
2003 marauder black 28,000 miles all stock. Garage Queen.
2004 marauder red daily driver.
O-rings only. Make sure to clean up any corrosion on both the head and the COT and slide it in. Lubricate the O-rings with oil or di-electric grease.
I eat apples until my stomach feels much more full than its normal.
I used both on my recent removal of the COT, better safe than sorry...
And if you cant find the O rings from ford, #20 O-rings from most hardware stores will also work.
Coolant crossover tube o-ring Ford part number: 391533-S100
2004 Black Marauder: #2237 Born on 4/1/2004
Eaton Swapped and a bunch of other goodies!
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
I bought a 100 pack from McMaster Carr years ago for 5 bucks
^^this.
Sent several members complimentary o-rings to keep the coolant flowing.
You can still get 25 packs, offered in two different materials (viton or something?)
I just bought the standard part number bag when I needed a pair.
9752K124 Boss Tube Fitting O-Ring, Viton(R), Fluoroelastomer, AS586A Dash Number 913, Packs of 25
sent from my rotary phone using Technicolor
2004 SILVER BIRCH/BLACK PAINT
DARK CHARCOAL NUDO LEATHER
#400 of 997 (SOLD)
2004 CV LX SPORT
ALL BLACK, 6 DISC, TUNED MZT (SOLD)
2004 300A MM BLACK
1 OWNER CAR, NO OPTIONS
DAILY DRIVER
2013 DAYTONA R/T
SUPER TRACK PACK
DAYTONA BLUE PEARL
#1763 off ~2100
NOW WITH A 392 & 3.73 posi!
dose anyone have the non ford o ring # for the COT plug by chance ? nothing in my service set matched up very well. Ford prices are high . The o rings chief suggests you get 25 for same money Ford wants for 2 . Thanks
sent from my rotary phone using Technicolor
2004 SILVER BIRCH/BLACK PAINT
DARK CHARCOAL NUDO LEATHER
#400 of 997 (SOLD)
2004 CV LX SPORT
ALL BLACK, 6 DISC, TUNED MZT (SOLD)
2004 300A MM BLACK
1 OWNER CAR, NO OPTIONS
DAILY DRIVER
2013 DAYTONA R/T
SUPER TRACK PACK
DAYTONA BLUE PEARL
#1763 off ~2100
NOW WITH A 392 & 3.73 posi!
There are currently 1 users browsing this thread. (0 members and 1 guests)