2.9 Whipple
Motown hard at work
Just wanted to post up and say thanks to Roger for helping me get the new Napa forged upper control arms, lower ball joints, tie rod ends, and Ridetech shocks with 750 rate spring installed yesterday. I'm down in my back and couldn't offer much assistance but he continued like a champion knocking this job out in my garage. We took it around the block afterward and WOW, what a difference! Thanks again buddy!
Sick-Speed play toy
In the A/C I hope! Looks purty!
Sent from my iThrone using Tapatalk
SOLD 12/31/2021
Cobra short block / ProCharger F1-A / Cog drive upgrade / Manley valves / Brian Tooley Racing valve springs / 80# inj. / -8 fuel line / -6 return / Aeromotive 340 pumps and regulator / 2012 GT500 TR6060 six speed / twin disc clutch / Driveshaft Shop GT500 upgraded CV joint shaft / BA5000 blow thru MAF/ 4.10's / Ford Racing 31 spline set up and Girdle / Metco D.S. safety loop / Stainless Works headers, cats, and everything else out back / ClassGlass hood / Bob's hood strut mod / Hurst line lock / Metco control arms / Addco front and rear sway bars / Monroe severe duty shocks all around / Race concepts rotors / Badgeless grille / 35% tint / FBM's interior LED kit and ambient lighting kit / Pioneer FB700 deck / kenwood speaker 4 Ch. / Rockford Fosgate 10" sub and amp / Kicker 6 X 8's all around / back up cam / bluetooth / Pioneer Xm / 704 RWHP 603 RWTQ tuned by Mo's Speedshop.
Senior Member
Nice watch.
Weißbirke Plünderer
Hey Roger, don't let Chris put the tools away just yet, I'll be over and can put mine on, well, I have to order them first, so it will be a few days
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
2.9 Whipple
Garage Door was down and we had fans pulling ice cold AC from the door to the house. Garage was a nice 70*Originally Posted by justbob
Hey Roger, don't let Chris put the tools away just yet, I'll be over and can put mine on, well, I have to order them first, so it will be a few days
Come on down buddy!
Supporting Member
Working on a cars suspension without getting your hands dirty?
When can I bring my MM by for a detail lesson?
1/4 Mile Time 11.542 @ 121.19 MPH
195,000 Miles & 275+ Runs Down the 1,320’
541.57 RWHP & 476.64 RWTQ on DynoJet
Tuned by Aric at Injected Engineering
Vortech Super Charger V-2 “T” Trim, 19 PSI
8 Rib Belt, Innovators West 10% Overdrive Dampner
Air to Air Intercooler, Mini-race Bypass
Ford Cobra Remanufactured Long Block
Snow Performance Water-Methanol Injection
Kooks Headers & X Pipe
GT MAF, 60lb injectors, Dash 8, Aero Rails, Twin Ford GT Pumps,
Kinsler Fuel Filter, Kenne Bell Boost-A-Pump
Monroe Sensatrac, Metco Control Arms, Addco Rear Sway Bar
31 Ford Spline Axles & Detroit Truetrac, 4:10 Ford Racing Gears
Dynotech MMC Driveshaft
A-1 Performance Trans, Forced Tailshaft Lube, Carbon Clutches
3,500 RPM Stall Precision Industries Torque Converter
B&M Deep Finned Trans Pan
AeroForce Scan Gauges , Auto Meter Oil, Fuel & Boost Gauges
Kenny Brown Dead Pedal, 35% Tint, Silver Star Head Lights
AutoPage Alarm RS-727LCD, Boston Acoustic NX87
Senior Member
Good work men. My fronts will need replacing how is a 750 spring rate on the city streets, not too firm? Any idea what the factory spring rate was. I'm looking to get this done soon. I've lost a shock with just over 50 thousand miles.
1987 GN running 10's. 2003 MM Blue Sold and dearly missed!
2003 Black 300B
Procharger P1sc with air to air intercooler
3,000 PI converter
4.10 Eaton posi 31 spline carrier
Moser 31 spline axles
Koos headers, with custom stainless exhaust, Megs tips
Carbon fiber drive shaft
Metco control arms
Every autometer procomp gauge in the catalogue
Weißbirke Plünderer
Marauders are 330 lb progressive springs, coilovers are constant rate. Chris went 750 due to weight of iron block, whipple, etc. I'm going with their standard 650 lb. Motown just put them on the coyote marauder
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
Senior Member
Awesome thank you!
2003 Black 300B
Procharger P1sc with air to air intercooler
3,000 PI converter
4.10 Eaton posi 31 spline carrier
Moser 31 spline axles
Koos headers, with custom stainless exhaust, Megs tips
Carbon fiber drive shaft
Metco control arms
Every autometer procomp gauge in the catalogue
GAME OVER, YOU LOSE!
Members helping members
Are those Napa parts special order or are they just the regular replacement parts?
Can you list the part#'s when you get a minute?
I miss whitey here
Always dressed to impress
Looks awesome fellas!! Ballpark figure going coil over on the front?
The twins2.3 whipple/aluminatorVortech V-2 lots of goodies
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
Post Marauder Mod Disorder
When done, tell us how the ride feels.
Your car's paint is sweet.
Weißbirke Plünderer
$650 non adjustable $750 for adjustable
2004 SB Ported Trilogy 48
Has supporting mods and stuff
Thanks to Marty O for his help in updating this car.
R.I.P.
Rex "SC Cheesehead"
I miss whitey here
Thank you!
Current marauders
04 DTR totaled JUST NOW starting to part out 7-21-2021 https://youtu.be/REUxjP1BVpg
04 Silver Birch Dark Charcoal Hardtop Whipple Supercharger
04 Silver Birch Dark Charcoal Hardtop V2 Supercharger
04 Silver Birch Dark Charcoal Converted
03 DBP Light Flint #122
03 DBP Dark Charcoal #232
03 Silver Birch 300b Light Flint Going to fix er up
03 Black 300a
04 Silver Birch Dark Charcoal moonroof in the works
04 Heaton Swapped DTR
Joe's Wrecked DTR rebuild thread
"Flyin Brian"
How do these compare to the Naake front coil overs?
2004 Black Marauder: #2237 Born on 4/1/2004
Eaton Swapped and a bunch of other goodies!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote