For Sale Anyone ever get into RC stuff ??

[bigcowl-imp]

Yep me to.......


I`ll start with this one........i forget the scale but its a little bigger then your hand..........



Then i just had to put the brushless motor in it and better battery and got it going right about 62 mph...........



Got into some nitro burning cars and trucks...



We would race these every nice sunday ,,,,,,,,had a blast with these .......motors where right about 3hp and spun to right about 58,000 rpm........yep 58,000 rpm 30% nitro

Then i had to try this guy.......its a 10th scale with a big block .21 motor with a 3 speed trans.........




Then i had to try one of these ofcoarse.....

[bigcowl-imp]

So then that stuff got alittle boring so a buddy and i where looking at my gas buggy that i just got and said what if we move the motor over and put this motor next to it ?? I SAID HELL YA.........
right about 5.4hp and each motors spins about 36,000 rpm




BUT that was not enough so what else ??

[bigcowl-imp]

We use to race these every nice Sunday......this motor was right about 3hp and the motor spun up to 58,000 rpm .......

[ImpalaSlayer]

you kidding me? nitrous for RC cars?

[Blackened300a]

I remember back in the day when I had my Nitro car, a 2 speed tranny was all that was available and you had the fun of trying to adjust the shift points with a allen key set screw.
I since got rid of my gas powered car and went for the cool factor.

Tamiya Knight hauler with 3spd electric shift transmission and MFU installed.

[RacerX]

Boy! I'd hate to see the end result if crack and hookers were your hobby!

[bigcowl-imp]

Originally Posted by ImpalaSlayer

you kidding me? nitrous for RC cars?

Yep and theres also super chargers

[guspech750]

Wow!! Those are all so very cool!!


Sent from my iPhone
Eaton Swap + 4.10's = Wreeeeeeeeeedom!!

[ktt]

i used to mess with nitro trucks. i had a cen genesis, never got it to run right. ended up mesin with the hpi savage truck.. the best truck i ever had.. then gave it all up completely

[tbone]

I've built and flown dozens of model airplanes over the years. The best is a P38 Lightning with two 4 stroke motors, retractable landing gear and a 6 foot wingspan. It took me 3 years to build from a balsa kit. It still flies great!

[SGT_MERC]

Here is some of the stuff I just sold.

Revo: Big block conversion, I had to build the conversion myself, there were no kits at the time. This is right after playing and it was filthy




Custom built rock crawler. I ordered the chassis and built the rest:






I had a T-Maxx, all Super Maxx aluminum parts, with a big block conversion, but didn't get a chance to get any pics before it sold. Between two enthusiasts, they bought all of my stuff within 48 hrs of posting it on Craigs List
I loved these cars. I enjoyed building them more than driving them.

[Big House]

I have 3 carbon fiber touring cars, 1/10, 1/9th, and 1/8 scales. All do 80 mph or better. Brushless truggy and a couple of 16th scales. My garage is a RC chop shop.

[cj7chris]

I have built and sold off a few Axial based crawlers in the past few years. There's a group in DFW that get together for crawling comps. Thinking about building another one but haven't gotten the itch bad enough yet.

[Local Boy]

I've got Helis, planes, war birds, trucks, crawlers, Sand Rails, 90+mph Monsters...

I love this stuff...

Aloha

[FreddieH]

I had a 30 size Hirobo Shuttle ZX Helicopter, I now have a 60 size elactric helicopter , an airplane and a T-Maxx 4x4 truck. I just got the second heli for Christmas, now waiting for good weather and time to brush up on my Heli relearning.