Blow off valves

[Kay-Tar]

My ProCharger BOV seems to be crapping out on me so it's time to get a new BOV. For those few on here that use em any recommendations? Also how did you setup your BOV out of the box?

My setup is a Vortech V2 S-trim
3.4" pulley, blow through maf, around 8psi max boost.

[scruff]

I got one that's adjustable ill have to look up the part # and get back to u but its a nice quality piece

[chief455]

Procharger Big Red Race valve.
Shop around, they are not cheap.

[JoeBoomz]

I have the vortech mondo max flow whatever. Haven't gotten much use out of it since winter hit but it's a pretty solid boost valve.

[chief455]

I have the vortech mondo max flow whatever. Haven't gotten much use out of it since winter hit but it's a pretty solid boost valve.

I've read solid results from them. Also, Tial 50mm valves are popular on other cars - but a valve knows no brand loyalty.

[1stMerc]

Procharger Big Red Race valve.
Shop around, they are not cheap.

Got that right. Ouch.

[MOTOWN]

Procharger Big Red Race valve.
Shop around, they are not cheap.

Thats what i run, excellent valve

[Marauderjack]

My ProCharger BOV seems to be crapping out on me so it's time to get a new BOV. For those few on here that use em any recommendations? Also how did you setup your BOV out of the box?

My setup is a Vortech V2 S-trim
3.4" pulley, blow through maf, around 8psi max boost.

How can ya tell it's "crapping out"??

[Haggis]

Take it apart, clean it and put it back together.

[Jeronimojc]

I am just starting my search on BOVs. Not a fan of noisy BOVs, but it is what it is. I was thinking of going with one of the BOVs suggested above, but I saw on a Zack TCG thread that he used a BOV from www.racepartssolutions.com on da'la's car. Do others here have experience with this BOV or care to share your thoughts? It looks to be a good deal.

[Zack]

Best BOV for the money.
High quality, solid piece and on the 3 cars Ive installed them on, not one problem.

For 8psi a Bosch bypass valve would suffice.

Or do what Haggis said, take apart clean put back together.

[Jeronimojc]

Thanks Zack. Is this the one you used?



Sent from my iPhone using Tapatalk

[Mike M]

I replaced mine with the black ProCharger valve.

I think this is it.

http://www.procharger.com/store/inde...d&productId=20

[chief455]

I replaced mine with the black ProCharger valve.

I think this is it.

http://www.procharger.com/store/inde...d&productId=20

I ran the Procharger ProFlo valve. Have to plumb it in line as opposed to the single flange styles listed above. Also, too much money. Bought 2 used for around 100 bucks each - should have bought one good 50mm flanged piece. The ProFlo has a butterfly that must swing open with a rod actuator, the others use a diaphragm = better reaction and faster blow off.

[Jeronimojc]

Thoughts on this one? I found one for $70, new.
http://www.vulturemotorsport.com/dnn...7/Default.aspx


Sent from my iPhone using Tapatalk