Activity Stream

Not all cars have auto headlights, but they all have wipers. So, it is possible to require vehicle manufacturers to run the headlights when the...

I think the Range kit is aimed more at the people who are using the Panther front suspension as a conversion for a 60s/70s F-100, who want the visual...

You can still get them on your christmas list!! :D

Yes, pm sent,

looking for a factory cooling fan/controller/shroud. Ford assy 3wih-8c607 with bosch controller 1137328115. Got anything? Steve

Somewhere in the settings there's a way to set it up so your sent messages show up in your folder...I don't remember how as I did this years ago.

You are correct. You need bigger calipers & pads. I suggest TCE Big Brake kit. It's expensive but the quality / stopping power is second to none....

my private messages never seem to work....sorry figured this might work to get a hold of fastblackmerc ive tried private messages and emails via...

I wonder what the advantage to using the bigger rotors is if the pads and calipers would be retained. I guess heat fade as they are a bigger sink. ...

I actually like this setup. You keep the stock Marauder Caliper and pads. Looks like you just have to open up the center of the Mustang rotor, or...

Its not the chains that are a problem usually its the guides and tensioners that go out, at worst if not repaired the chain will eat through the...

As far as I am aware, timing chain failure isnt an instant thing. When they start going you will start hearing a rattle that will steadily increase....

My black has 274000 with original timing equipment, but the oil pump blew up. I’m currently driving my silver. I just hit 240,000 also with original...

Thank you!

pm sent...

Member Lji_372 makes the brackets for big brakes and list of parts to buy. It's proven by many members. He even offers custom engraved calipers. Read...

OK, I'm interested if it's unpitted. Let's do business!

No pitting that I remember the paint was flaking off in a few places.

Ed, PM sent. Randy

torque to yield procedure for crank pulley bolt from repair manual

sorry guys, crankshaft PULLEY bolt.

Look at it..... remove anything attached to the intake, then remove the intake.....

What kind of shape was it in before it was blasted and painted? Is there any pitting?

Im trying to figure out how to remove the intake so I can clean and paint it, any ideas??

Resurrecting an old thread that I started almost 20 (!!) years ago ... I am still a Ford dealer parts guy, but at a different store now. As many of...