A coupled used MM parts

[jwibbity]

Looking in the garage and I saw some stuff I'll never even use

MM Wheel Center Cap (decent condition)-$15

Stock MM Control Arms (Replaced with Metco at 100K)-$20

MM (Silver Birch) Passenger tailight with harness-$20

The tailight has been night shaded just slightly. Plastic body color piece underneath light is damaged and will most likely need to be repainted.

Really don't wanna throw this junk away is somebody needs/wants it

[8UWITH6]

Take 8 dollars on the center cap? Just kidding. PM me for address and shipping charges.

[Guittard22]

2 in line for cap

[8UWITH6]

Do you need the cap because you are missing one? Or just to have as spare like me? If you NEED one I will let you move in front. Otherwise I would like to have it. Just trying to help out. LMK

[lifespeed]

You can go ahead and throw those 100k mile control arms away ;)

[jwibbity]

You can go ahead and throw those 100k mile control arms away ;)

People have used old stocks to make Zack&Mac Control Arms, that's why i haven't just tossed them....

[Zack]

People have used old stocks to make Zack&Mac Control Arms, that's why i haven't just tossed them....

That is a completely inaccurate description of our originals

[Guittard22]

Do you need the cap because you are missing one? Or just to have as spare like me? If you NEED one I will let you move in front. Otherwise I would like to have it. Just trying to help out. LMK



I have one cap that has a chip in it - it's not life or death at this point :beer:

[O's Fan Rich]

People have used old stocks to make Zack&Mac Control Arms, that's why i haven't just tossed them....

They take two sets of control arms, weld them together, put the bushings in.

I have two sets of old originals and was going to do the same. But... I got a great deal on a set of Metco's (Thanks again Mark.)

The Mac and Zack arms were awesome tubular steel custom creations.