PDA

View Full Version : How to remove the LCM (Lighting Control Module)



fastblackmerc
01-06-2016, 09:10 AM
The LCM is about the size of a brick and is located just to the right of the steering column, in front of the gas pedal.

There are 3 electrical connectors on the LCM.

LCM Removal:


Remove the bottom two connectors by depressing the tabs and pulling on the connectors.
Remove the 2 mounting screws with a 7mm nut driver or socket.
Push the LCM towards the gas pedal while rotating it up towards the roof. Once it’s free of the bracket, pull the back of the LCM down towards the floor.
You should now be able to release the last electrical connector.


Just reverse the steps for re installation.

martyo
01-06-2016, 09:33 AM
Another great write up!

Jim you are on a roll!!!

fastblackmerc
01-06-2016, 10:03 AM
Another great write up!

Jim you are on a roll!!!

Just killing time at work.... no one has any problems...... :eek:

martyo
01-06-2016, 11:26 AM
Just killing time at work.... no one has any problems...... :eek:

I got 99 problems! :P