PDA

View Full Version : Filter for the procharger inlet


cer0413
01-19-2016, 02:14 PM
Does anyone know the length and width of the filter that's in front of this centri unit? I'm about to begin my procharger install and I would like to install a short style filter over the inlet.

Pics for reference:
http://uploads.tapatalk-cdn.com/20160119/0436065fb79746e1db368702c946ff 14.jpg
http://uploads.tapatalk-cdn.com/20160119/096867ca85558cd5b578ef135dbfd1 fb.jpg
http://uploads.tapatalk-cdn.com/20160119/f54e2a7f65bb8725a9f94314a97425 f1.jpg
fastblackmerc
01-19-2016, 02:51 PM
Measure the onside diameter and how much room you have to work with and go to K&N or S&B's website.

S&B: http://www.sbfilters.com/

K&N: http://www.knfilters.com/
Motorhead350
01-19-2016, 02:54 PM
You can find something to use at Pepboys too.

Other members will disagree, but it worked fine for me.
justbob
01-19-2016, 03:34 PM
I bought mine at Advance. Looks to be the same shortly one.


Sent from my iThrone using Tapatalk
cer0413
01-19-2016, 04:08 PM
I bought mine at Advance. Looks to be the same shortly one.


Sent from my iThrone using Tapatalk
I think your procharger inlet is larger than mines. Procharger measured mines at 3.75".
RubberCtyRauder
01-19-2016, 04:34 PM
I think your procharger inlet is larger than mines. Procharger measured mines at 3.75".

Genetics....
MOTOWN
01-19-2016, 08:36 PM
Genetics....

LMAO!:cool:
justbob
01-19-2016, 08:38 PM
Genetics....

O.M.G.... LOL!


I think your procharger inlet is larger than mines. Procharger measured mines at 3.75".

I believe that's what mine is. Regardless, it comes with slip adapters.



Sent from my iThrone using Tapatalk
8UWITH6
01-19-2016, 08:43 PM
Now thats funny right there.
sailsmen
01-19-2016, 10:24 PM
Heres a good article;

http://www.onallcylinders.com/2013/11/27/match-air-filter-size-engine/

127.2348 Current Filter Area
87.6481597 Min FA Required

I used 20,839 per K&N vs the 25,500 in this article.
justbob
01-20-2016, 05:06 AM
Heres a good article;

http://www.onallcylinders.com/2013/1...r-size-engine/





127.2348Current Filter Area

87.6481597 Min FA Required



I used 20,839 per K&N vs the 25,500 in this article.


Error 404 - fail.


Sent from my iThrone using Tapatalk
cer0413
01-20-2016, 06:36 AM
Genetics....
lol I'm buy buying you one
sailsmen
01-20-2016, 08:51 AM
Error 404 - fail.


Sent from my iThrone using Tapatalk

Odd, it was there last nite.

Try this;
http://www.onallcylinders.com/2013/11/27/match-air-filter-size-engine/
justbob
01-20-2016, 03:38 PM
It mentions nothing about being attached right to the blower. That changes everything.

I figured mine wouldn't hold up on the dyno. Surprisingly it well exceeded my needs.


Sent from my iThrone using Tapatalk
cer0413
01-21-2016, 12:29 PM
It mentions nothing about being attached right to the blower. That changes everything.

I figured mine wouldn't hold up on the dyno. Surprisingly it well exceeded my needs.


Sent from my iThrone using Tapatalk
When you gave me a tour of your car, I swear I didn't see a filter. I remembered the bell housing being on there.