Good shop to do gear swap

[marauder man]

I live in western WI and i'm looking for a good shop to do 4:10 gears in my MM. Is there any shop around the cities?

[RubberCtyRauder]

Any shops that do mustang mods or a mustang club would be a good place to look. You'll need a tune for the 4.10 as well

[fastblackmerc]

You might as well replace the bearing, seal, etc. while you or someone else is in there. I'd look at getting a better cover with the bearing supports and replace the bearing cap bolts with studs. Also get synthetic 75w/140 gear oil and be prepared to replace the clutches if they are bad.

[BAD MERC]

This is a common rear end. The Ford 8.8 is in almost everything so any performance shop could do it. Replace ALL the seals and bearings while it's apart.

[justbob]

This is a common rear end. The Ford 8.8 is in almost everything so any performance shop could do it. Replace ALL the seals and bearings while it's apart.


Not too mention its damn near copy cat of a 10 Cheby!


Sent from my iThrone using Tapatalk

[marauder man]

I guess if I want to do it, I will have to drive a couple hours.

[crouse]

I live in Rosemount, MN and I had Master Transmission in Rosemount install my 4.10's. I often see muscle cars parked in their parking lot, so that tells me they are a trusted shop.

http://www.mastertransmission.com/

Apple Valley Ford will also do gear changes, but at a much higher price.

[marauder man]

I live in Rosemount, MN and I had Master Transmission in Rosemount install my 4.10's. I often see muscle cars parked in their parking lot, so that tells me they are a trusted shop.

http://www.mastertransmission.com/

Apple Valley Ford will also do gear changes, but at a much higher price.

What do they charge?