Oil Pickup Tube

[FordNut]

Need a Marauder oil pickup tube.

[F1erceK]

You can use the 03-04 cobra one with the marauder pan with no issue.

[Zack]

You can use the 03-04 cobra one with the marauder pan with no issue.

This is the most incorrect statement of the entire year.

[F1erceK]

Second hand info Zack, I will PM you.

[F1erceK]

Zack, could he use a Mark8 pickup tube? They're very similar. When I compared I think there was a half inch height difference.

[Zack]

Zack, could he use a Mark8 pickup tube? They're very similar. When I compared I think there was a half inch height difference.

Different tube diameter that goes into the oil pump

[Bad_S55]

Marauders, Crown Vics, & Marquis' share the same oil pan. 2V cars use a 12mm oil pickup tube, and Marauders use a 13mm tube.

[Zack]

Marauders, Crown Vics, & Marquis' share the same oil pan. 2V cars use a 12mm oil pickup tube, and Marauders use a 13mm tube.

Yep. You can order a CV tube, and weld it to a 4V flange.

[Serge]

While we are on the subject, do any other pick up tubes work on Marauders that don't require fab work? Aviators perhaps?

[03mmmonroe]

Need a Marauder oil pickup tube.

My motor was built the the GT500 pick up tube. Had to cut a half moon or notch in the baffle to get the tube to drop into the sump area. My engine builder was happy with how it turned out and stands behind his motor build. Hope that helps.

Russ

[Curless]

WE made one with the last engine we did, used a CV pick up and a Marauder screen. Welded them together.

[VA-Mach1]

I have one from a 03 88k. Hadn't thought about selling it until I saw your thread. I used a MM motor in my Mach1 so I used my Mach1 pan and pickup and have the MM pan and pickup on the trashed motor that came out of my Mach1.

[FordNut]

pm sent...