Front license plate holder/bracket

[Mote]

Mine was damaged when my car was backed into :mad2: Luckily it was hit pretty square, with no other damage (apparently). The other vehicle has damage to their bumper cover - A hole from one of the license plate screw, and an outline of my bracket...

[RubberCtyRauder]

They are sold on eBay or try tascsparts.com if no one has one. They are the same as crown Vic ones so use that to search is my recommendation

[Mote]

They are sold on eBay or try tascsparts.com if no one has one. They are the same as crown Vic ones so use that to search is my recommendation

They are close. Looks like the top mounting holes are the same, but the lower ones are missing on the CV one

[RubberCtyRauder]

It only uses two holes to mount it

[Mote]

It only uses two holes to mount it

And that is plenty sturdy? It doesn't flop around? That would be great, because they are affordable. Thanks btw

[RubberCtyRauder]

Mine has two. The covers come with 2 dimples where it mounts. Cannyouvtske yours off and see his is yours mounted?

[Mote]

Mine has two. The covers come with 2 dimples where it mounts. Cannyouvtske yours off and see his is yours mounted?

The plate is held on by 2 screws. The bracket is held onto the bumper with 4 rivets.

Does the CV bracket have the same curve/contour to fit tight against the bumper, like the Marauder one?

[RubberCtyRauder]

I thought mine only has two screws attaching to cover but it has been long time since I had front plate off. The bumper cover is closer to a cv cover than a marquis in my opinion. No I'm not positive it matches the curve , I only recall others using cv ones but maybe they were not being fussy . Look for a marauder one to be certain or see if anyone else replies that has done it