PDA

View Full Version : Wanted To Buy PCV Hose


F1erceK
04-15-2016, 09:36 AM
See title.
champ1173
04-15-2016, 10:08 AM
Look on ebay
F1erceK
04-15-2016, 10:17 AM
Did, can't seem to find the part number on Tasca and mine is worn off.
champ1173
04-15-2016, 12:08 PM
I bought one off of there last year, but I'm not sure who I bought it from. I assume you tried the dealership.
fordnut02
04-15-2016, 07:28 PM
See title.

I ordered one from my local dealer few months back came with tube new hoses and PCV
Ken
04-16-2016, 05:09 AM
Need one too. Mine is wrapped with black duct tape,
DocMayhem
04-16-2016, 09:15 AM
Is this the one you are looking for?

http://www.ebay.com/itm/261713981981?_trksid=p2055119. m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
DocMayhem
04-16-2016, 09:53 AM
I have seen that part before, I believe that is from a 2003-04 Mustang Mach 1 maybe? I believe the Ford parts sites show that, as for a Marauder, but it is not.
Shornaday
04-16-2016, 11:14 AM
DocMayhem - glad you chimed back in, I was going to go out and look on my Marauder, but then remembered that it is in the shop for brakes. :lol:

You are correct, I also found this in the shoptalk forum.

http://www.mercurymarauder.net/forums/showthread.php?t=100384&highlight=PCV+Hose

Also borrowed the pic from that discussion.

Goes to show that research is needed to double check the Parts on websites. Probably another thing to remember when searching and ordering thru some of the websites is that they ask for the VIN so they can check to make sure part is correct. At least those that I have ordered thru.

As some of the Forum members say Google is your friend....
massacre
04-16-2016, 06:40 PM
Kevin I might have one I got from Musclemerc years ago.
Let me look tomorrow.
fordnut02
04-17-2016, 12:10 PM
just checked my old Invoice part number 3W3Z 6C324 AA
F1erceK
04-19-2016, 07:29 AM
These spin freely and will work with Mach1 or Marauder. I can confirm this because I am using powder coated Mach1 valve covers where the PCV is on the back, and the Marauder one fits fine. I need a new one because the PO of the car didn't properly care for the hose to PCV joint and it's cracked. I have it installed currently. Thanks for the eBay link, I was having a hard time getting the part number which was unusual for me.