Supercharger lower intake

[LG88]

Lower intake for supercharger set up, this will work with eaton swap or trilogy set up.

Water inlet also available

Good condition

No cracks or leaks

$280 shipped

Water inlet $125 shipped

http://uploads.tapatalk-cdn.com/20160428/3f677f514fafeba62298b4c2447dfa ca.jpghttp://uploads.tapatalk-cdn.com/20160428/07374accf917a00b24358c75b8bbb5 16.jpg
http://uploads.tapatalk-cdn.com/20160530/f891a875d4b1b9cfee871fe8b8f51b 35.jpg
http://uploads.tapatalk-cdn.com/20160530/26a26df1da72c3d55210f8c42bd7aa 52.jpg



Sent from my iPhone using Tapatalk

[MOTOWN]

SMOKIN DEAL ALERT!!!!!!!!!!!

[chief455]

SMOKIN DEAL ALERT!!!!!!!!!!!

EARLY CHRISTMAS!!

[Spectragod]

EARLY CHRISTMAS!!

Christmas in a cup?

[LG88]

Bump......

[LG88]

Still available .......

[RocsMerc]

I just want to point out, an intake from a Trilogy kit won't work on an Eaton. Trilogy modifies the intake. There is a section of the area the gasket goes on that was shaved off. You can see the outline left behind by the original Eaton gasket in this picture.

http://www.mercurymarauder.net/gallery/data/500/medium/PIC_0017.JPG

I had to shave it off myself to install my Trilogy supercharger.

http://www.mercurymarauder.net/gallery/data/500/medium/PIC_0018.JPG

Anyone who buys this would need to get a Trilogy adaptor plate and use a compatible supercharger.

[RacerX]

Anyone who buys this would need to get a Trilogy adaptor plate and use a compatible supercharger.
I had a friend's spare Trilogy adapter plate for a while. That plate will only work with the Trilogy SC. An Eaton M112 will still seal perfectly with the tab cut off the inside of this lower. You can seal that spot with rtv on both sides of the gasket near where the tab is. There is a hole in the Eaton housing where a set screw acts as the stop for the bypass valve lever arm. You could even put a little rtv up in that hole.

https://jonbondperformance.com/images/Gasket%20M112%2003-04%20Cobra.JPG

http://www.ebay.com/itm/03-04-Cobra-supercharger-to-lower-intake-manifold-gasket-Whipple-Kenne-Bell-/291722421409

[Guittard22]

I had a friend's spare Trilogy adapter plate for a while. That plate will only work with the Trilogy SC. An Eaton M112 will still seal perfectly with the tab cut off the inside of this lower. You can seal that spot with rtv on both sides of the gasket near where the tab is. There is a hole in the Eaton housing where a set screw acts as the stop for the bypass valve lever arm. You could even put a little rtv up in that hole.

https://jonbondperformance.com/images/Gasket%20M112%2003-04%20Cobra.JPG

http://www.ebay.com/itm/03-04-Cobra-supercharger-to-lower-intake-manifold-gasket-Whipple-Kenne-Bell-/291722421409


Thanks for the heads up - I have an eaton lower intake and have a trilogy blower - maybe I get my ass moving and get the dam thing installed this summer :confused: good luck with the sale - you breaking up this or only selling as a group ?

[BeeDamn]

pm sent please check

[LG88]

UPDATE

Intake sold

Water inlet still available