4V Comp Cams for Sale

[SGT_MERC]

I have a set of 4V Comp Cams for sale.
They are Xtreme XE-R Series, XE262AH-114
They're still on the heads I pulled off of my engine.
They have maybe 500 miles on them.
Sold...
http://i1180.photobucket.com/albums/x417/SGT_MERC/Mobile%20Uploads/IMG_20160518_202829249_zpshs11 1aor.jpg (http://s1180.photobucket.com/user/SGT_MERC/media/Mobile%20Uploads/IMG_20160518_202829249_zpshs11 1aor.jpg.html)

http://i1180.photobucket.com/albums/x417/SGT_MERC/Mobile%20Uploads/IMG_20160518_202403464_zps8alo hzpa.jpg (http://s1180.photobucket.com/user/SGT_MERC/media/Mobile%20Uploads/IMG_20160518_202403464_zps8alo hzpa.jpg.html)

http://i1180.photobucket.com/albums/x417/SGT_MERC/Mobile%20Uploads/IMG_20160518_202153643_zpsygnm t3ui.jpg (http://s1180.photobucket.com/user/SGT_MERC/media/Mobile%20Uploads/IMG_20160518_202153643_zpsygnm t3ui.jpg.html)

http://i1180.photobucket.com/albums/x417/SGT_MERC/Mobile%20Uploads/IMG_20160518_202110414_zpsrfkj zxeo.jpg (http://s1180.photobucket.com/user/SGT_MERC/media/Mobile%20Uploads/IMG_20160518_202110414_zpsrfkj zxeo.jpg.html)

http://i1180.photobucket.com/albums/x417/SGT_MERC/Mobile%20Uploads/IMG_20160518_202007644_zpsywck ey5u.jpg (http://s1180.photobucket.com/user/SGT_MERC/media/Mobile%20Uploads/IMG_20160518_202007644_zpsywck ey5u.jpg.html)

[lifespeed]

Do you know the specs on the stockers?

[RacerX]

I believe the stockers are:
Intake 186 @ .050 .390 lift
Exhaust 194 @ .050 .390 lift

[Henry]

Are you going to ford carlisle? I'm interested in them

[lifespeed]

I believe the stockers are:
Intake 186 @ .050 .390 lift
Exhaust 194 @ .050 .390 lift

Those are pretty small! Too bad cam upgrades are such an expense for these motors.

[RacerX]

Those are pretty small! Too bad cam upgrades are such an expense for these motors.

The Xtreme XE-R Series, XE262AH-114 are nice cams. No need to upgrade your springs on these either.

[daddyusmaximus]

Those are pretty small! Too bad cam upgrades are such an expense for these motors.

Hell yeah. In the old days you could buy only one cam for your 302. With these Marauders we have to buy 4.

[WPG_Merc]

:popcorn::popcorn:

[SGT_MERC]

This is how they sound...

http://i1180.photobucket.com/albums/x417/SGT_MERC/th_VID_20130120_163742_320_zps 62b6821f.mp4 (http://i1180.photobucket.com/albums/x417/SGT_MERC/VID_20130120_163742_320_zps62b 6821f.mp4)

[376shovel]

I have a set of 4V Comp Cams for sale.
They are Xtreme XE-R Series, XE262AH-114
They're still on the heads I pulled off of my engine.
They have maybe 500 miles on them.
$900 shipped to the lower 48.. I will accept a reasonable offer

Why are you selling sir? How did they perform?

[SGT_MERC]

Why are you selling sir? How did they perform?

A buddy of mine has the same set in his Mach 1. They performed very well, the bottom end torque was very noticeable and the top end was alot stronger. The stock springs did not have to be replaced.
I tried them with my 3.4 Whipple, but the boost was building too high and there was no scavenging due to no valve overlap.
So I pulled them and now have the GT500 cams, springs and retainers.

[SGT_MERC]

Are you going to ford carlisle? I'm interested in them

If I finish my car by then, I'll be there.

[RacerX]

So I pulled them and now have the GT500 cams, springs and retainers.
I hope you mean GT40 or FR500 cams. The GT500 are close to our stockers. You can change centerlines to get overlap if that's what you want for Isky's "5th cycle". If you have the GT40s, those are 242/247 duration and .438/.447 lift. Nice!

[SGT_MERC]

bumpin ttt...

[ginger]

Want these....but no CA$H!

Sent from my VS985 4G using Tapatalk

[376shovel]

I want them, but still researching how much install will cost in tools/ timing kit.

[SGT_MERC]

bumpin it ttt...

[RubberCtyRauder]

Anyone know if these cams work with a trilogy, meaning not lose power, yet would still make some additional power?

[MOTOWN]

Anyone know if these cams work with a trilogy, meaning not lose power, yet would still make some additional power?

PM Justbob

[chief455]

Anyone know if these cams work with a trilogy, meaning not lose power, yet would still make some additional power?


PM Justbob
Same, or Marty, if he'd be swapping them in.
I'm thinking they'd help, not hurt, using stock springs and all :cool: lumpty-lumpity

[RubberCtyRauder]

I've spoke to Marty about cams..I'm undecided if I will ever do some or not..They could cause loss of power on the low end where trilogy and the car really likes it. Yes, I;ve heard a few cars with cams and it sounds awesome so more food for thought for the time being.

[SGT_MERC]

Bumpin it ttt....

[SGT_MERC]

Someone has to want these... Pretty much half price, even if you put them away for a future build.

[SGT_MERC]

bumpin it ttt...

[WPG_Merc]

I want them, but still researching how much install will cost in tools/ timing kit.

You maybe looking at 2 or 3 gs to instill on the car.
At Mo's it was about $1,500 & 3 days just to degree them.

I Also used
New Timing Chains and Guide kit
Manley High Performance 4V spring kit
4 ARP camshaft sprocket bolts
Upgraded fuel filter & pump
42 LBS Injectors (The stock 25 LBs injectors will be to lean for the hungry cams)
:)

[SGT_MERC]

bumpin it ttt... Price lowered

[Henry]

I sent you a pm. Very interested

[SGT_MERC]

Pics added...Bump

[SGT_MERC]

Sold...........