Oil pick up tube fyi

[Serge]

I recall reading that Marauder oil pick up tube is no longer available so I wanted to pass along some info on another tube that can be used.

I just installed a high flow Ford Racing oil pump M-6600-F46 meant for SN197 GT and GT500 and the pickup tube that comes with it can be used with Marauder oil pans. It requires slight hammering of the windage tray in 2 areas but other than that fits with no issues.

[chief455]

interesting. wonder if the tube is sold seperately, and has the same size/bolt pattern...

[Serge]

Bolt pattern is the same since it's a 4v pump. Not sure if you can buy it separately but the pump is only about $115.

[babbage]

Good info Serge. Any pics? Is the tube too big for the windage tray - thus the hammer?

[SGT_MERC]

Just an FYI... I have an extra one.

[Serge]

Good info Serge. Any pics? Is the tube too big for the windage tray - thus the hammer?

Didn't take any pics. It's not too big, just bends in a different spot so the tray needs to be dented in one spot on the edge.