PDA

View Full Version : marauder exhaust flange question!!!!



Turbo4v06
05-25-2016, 02:51 PM
bought this kit for my cv before i purchased the marauder now I'm trying to figure out if it will fit the marauder.

Are the o2s and exhaust flanges the same on an 03+ panther and a marauder???

martyo
05-25-2016, 07:05 PM
bought this kit for my cv before i purchased the marauder now I'm trying to figure out if it will fit the marauder.

Are the o2s and exhaust flanges the same on an 03+ panther and a marauder???

Those look like a 2v set up. If so its no Bueno.

Turbo4v06
05-25-2016, 07:12 PM
thank you sir, I'll post it up locally and look into having a new one custom made.

Turbov6Bryan
05-25-2016, 07:19 PM
Hold on

The flange to HEAD may be different, but the orientation from 2 bolt donut gasket can be changed if necessary

I'll give ya 8.00 and see if it works on my car :)

Zack
05-25-2016, 08:24 PM
any pics installed on a car?

Turbov6Bryan
05-25-2016, 08:54 PM
Looks ok to me, split scroll t4 flange

2 hot pipes meeting at the flange, not like it's a common open pipe with a flange above it


Check the back pressure ratio from boost to exhaust pressure, shoot for 2:1 or less

Add timing if the ratio is high


Also, even that turbo kit is enough to blow the rods out of a stock marauder motor... So keep it in check,..... $8.01 ;)

Turbo4v06
05-26-2016, 05:23 AM
any pics installed on a car?

definitely a slim fan will need to be used.

Serge
05-26-2016, 05:35 AM
The manifolds will bolt up to the car. The ports are different shape and will restrict the flow though.

Turbo4v06
05-26-2016, 05:38 AM
Looks ok to me, split scroll t4 flange

2 hot pipes meeting at the flange, not like it's a common open pipe with a flange above it


Check the back pressure ratio from boost to exhaust pressure, shoot for 2:1 or less

Add timing if the ratio is high


Also, even that turbo kit is enough to blow the rods out of a stock marauder motor... So keep it in check,..... $8.01 ;)

lol, my current 2v set up merges to one and runs single to the t4.

I would only run 6# until I finish the built motor anyways.

Turbo4v06
05-26-2016, 05:43 AM
The manifolds will bolt up to the car. The ports are different shape and will restrict the flow though.

my question is about the flange at the end of the manifolds, I wouldn't dare bolt up circle port exhaust manifold to a oval port head:)

Zack
05-26-2016, 05:59 AM
Is that piping for sale by any chance?

Turbo4v06
05-26-2016, 06:08 AM
Is that piping for sale by any chance?

It was/is, put it up locally because a friend of mine told me it will not fit the marauder. Just want to make sure because I would love to boost the blue.

Turbo4v06
05-26-2016, 06:14 AM
Is that piping for sale by any chance?

It was/is, put it up locally because a friend of mine told me it will not fit the marauder. Just want to make sure because I would love to boost the blue.