Motown hard at work

[CWright]

Just wanted to post up and say thanks to Roger for helping me get the new Napa forged upper control arms, lower ball joints, tie rod ends, and Ridetech shocks with 750 rate spring installed yesterday. I'm down in my back and couldn't offer much assistance but he continued like a champion knocking this job out in my garage. We took it around the block afterward and WOW, what a difference! Thanks again buddy!

http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/E865CA6A-BCE9-489B-A745-3CAC495D872C_zpsjjcnsq5n.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/E865CA6A-BCE9-489B-A745-3CAC495D872C_zpsjjcnsq5n.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/75BDC406-61DE-40A1-9FF6-F6A252B83FA2_zps9b1tzmqq.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/75BDC406-61DE-40A1-9FF6-F6A252B83FA2_zps9b1tzmqq.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/116FCA3A-5593-4C3F-9D65-AF6CECF0382D_zpsptegdj5p.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/116FCA3A-5593-4C3F-9D65-AF6CECF0382D_zpsptegdj5p.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/D6C56C73-874C-488B-96BD-BD4A9A162B91_zpswhwq5hmb.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/D6C56C73-874C-488B-96BD-BD4A9A162B91_zpswhwq5hmb.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/2FB232DA-B5C8-470F-A5A3-4E089A28C812_zpsvzqfzb32.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/2FB232DA-B5C8-470F-A5A3-4E089A28C812_zpsvzqfzb32.jpg.h tml)

[justbob]

In the A/C I hope! Looks purty!


Sent from my iThrone using Tapatalk

[03blackvegas]

Nice watch.

[RubberCtyRauder]

Hey Roger, don't let Chris put the tools away just yet, I'll be over and can put mine on, well, I have to order them first, so it will be a few days :D

[CWright]

In the A/C I hope! Looks purty!


Sent from my iThrone using Tapatalk

Garage Door was down and we had fans pulling ice cold AC from the door to the house. Garage was a nice 70* :D


Hey Roger, don't let Chris put the tools away just yet, I'll be over and can put mine on, well, I have to order them first, so it will be a few days :D


Come on down buddy!

[sailsmen]

Working on a cars suspension without getting your hands dirty?

When can I bring my MM by for a detail lesson?

[JimP]

Good work men. My fronts will need replacing how is a 750 spring rate on the city streets, not too firm? Any idea what the factory spring rate was. I'm looking to get this done soon. I've lost a shock with just over 50 thousand miles.

[RubberCtyRauder]

Marauders are 330 lb progressive springs, coilovers are constant rate. Chris went 750 due to weight of iron block, whipple, etc. I'm going with their standard 650 lb. Motown just put them on the coyote marauder

[JimP]

Marauders are 330 lb progressive springs, coilovers are constant rate. Chris went 750 due to weight of iron block, whipple, etc. I'm going with their standard 650 lb. Motown just put them on the coyote marauder
Awesome thank you!

[Mr. Man]

Members helping members :2thumbs:

Are those Napa parts special order or are they just the regular replacement parts?

Can you list the part#'s when you get a minute?

[Turbov6Bryan]

Always dressed to impress

Looks awesome fellas!! Ballpark figure going coil over on the front?

[Lowndex]

When done, tell us how the ride feels.

Your car's paint is sweet.

[RubberCtyRauder]

Always dressed to impress

Looks awesome fellas!! Ballpark figure going coil over on the front?

$650 non adjustable $750 for adjustable

[Turbov6Bryan]

$650 non adjustable $750 for adjustable

Thank you!

[loud2004marquis]

How do these compare to the Naake front coil overs?

[Turbov6Bryan]

When done, tell us how the ride feels.

Your car's paint is sweet.

The whole car is sweet... I've seen it up close in person :2thumbs:

[CWright]

Members helping members :2thumbs:

Are those Napa parts special order or are they just the regular replacement parts?

Can you list the part#'s when you get a minute?

I'll be home later tonight and post them up. Yes on the Napa control arms and moog on the rest. .


Always dressed to impress

Looks awesome fellas!! Ballpark figure going coil over on the front?

780.00 shipped to the door. 750 rate spring tho, not sure if 650 is cheaper but I think it is.


When done, tell us how the ride feels.

Your car's paint is sweet.

Thanks, I only took around the block but getting aligned Tuesday. I'll wait till then and post up after getting on the open road. I will say I'm very impressed with the short distance we went!


The whole car is sweet... I've seen it up close in person :2thumbs:

Thanks buddy!

[RubberCtyRauder]

The whole car is sweet... I've seen it up close in person :2thumbs:

I've touched it..lol..when Chris wasn't around at mo's during the trans issues before the 480le. I'm ordering the ridetechs prolly after holiday . Spring rates are priced same. 650 lb is standard, get more if you have extra weight up front. Spring are $75 each if you want 2 different ratings

[CWright]

I've touched it..lol..when Chris wasn't around at mo's during the trans issues before the 480le. I'm ordering the ridetechs prolly after holiday . Spring rates are priced same. 650 lb is standard, get more if you have extra weight up front. Spring are $75 each if you want 2 different ratings

Easy Sleazy! :D

[FordNut]

Nice shocks. I might have to get me some of those.

[lji372]

only thing it needs now is more cowbell.........

[CWright]

http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/844B981C-728D-43B5-8246-222D02E075F7_zps434wlclc.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/844B981C-728D-43B5-8246-222D02E075F7_zps434wlclc.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/A0A957C5-D317-45D2-8EC3-59CF87A71E54_zpsxqmuzrzb.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/A0A957C5-D317-45D2-8EC3-59CF87A71E54_zpsxqmuzrzb.jpg.h tml)


I also got the lower ball joints from Napa.

Oreilly's I ordered Moog inner and outer Tie rods and Moog sway bar end links for the Marauder.

[Mr. Man]

I believe the MM came with a mostly P-71 suspension up front. Is that a correct assumption?

Are the new ball joints, tie rods, and end links heavier duty than Fords? I believe I have read that the Moog end links are beefier than what Addco supplies.

[MOTOWN]

That kit is top notch all day , Moog components used throughout , Moog also makes Napas forged control arms , honestly the 750lb springs should be standard , they adjust faster , and you cannot tell any difference from the 650lb springs to the 750lb springs, it gives a very firm, but comfortable ride.

[crownvic97]

Looks great, must handle amazing!

[Mr. Man]

I'm interested in how the constant rate springs will feel over a variety of surfaces, not just smooth paved roads.

[cer0413]

Just wanted to post up and say thanks to Roger for helping me get the new Napa forged upper control arms, lower ball joints, tie rod ends, and Ridetech shocks with 750 rate spring installed yesterday. I'm down in my back and couldn't offer much assistance but he continued like a champion knocking this job out in my garage. We took it around the block afterward and WOW, what a difference! Thanks again buddy!

http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/E865CA6A-BCE9-489B-A745-3CAC495D872C_zpsjjcnsq5n.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/E865CA6A-BCE9-489B-A745-3CAC495D872C_zpsjjcnsq5n.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/75BDC406-61DE-40A1-9FF6-F6A252B83FA2_zps9b1tzmqq.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/75BDC406-61DE-40A1-9FF6-F6A252B83FA2_zps9b1tzmqq.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/116FCA3A-5593-4C3F-9D65-AF6CECF0382D_zpsptegdj5p.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/116FCA3A-5593-4C3F-9D65-AF6CECF0382D_zpsptegdj5p.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/D6C56C73-874C-488B-96BD-BD4A9A162B91_zpswhwq5hmb.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/D6C56C73-874C-488B-96BD-BD4A9A162B91_zpswhwq5hmb.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/2FB232DA-B5C8-470F-A5A3-4E089A28C812_zpsvzqfzb32.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/2FB232DA-B5C8-470F-A5A3-4E089A28C812_zpsvzqfzb32.jpg.h tml)
Give him some lotion

[CWright]

Got it aligned this morning and just drove about 20 miles. Took some curvy roads, bumpy roads, and smooth roads. All I can say is I can't believe what I've been missing. It feels as tight as my 2015 Dodge Charger. This was worth the money!

[Granddaddy Marq]

I think Somebody needs to get a No Compete Agreement with Motown. Does MO money, now mean Motown Money?

[MOTOWN]

Got it aligned this morning and just drove about 20 miles. Took some curvy roads, bumpy roads, and smooth roads. All I can say is I can't believe what I've been missing. It feels as tight as my 2015 Dodge Charger. This was worth the money!

Excellent news! Now I'll be installing Ridetechs on Silver over the weekend, cant wait!


I think Somebody needs to get a No Compete Agreement with Motown. Does MO money, now mean Motown Money?

I like the sound of Money! Lol

[lifespeed]

Got it aligned this morning and just drove about 20 miles. Took some curvy roads, bumpy roads, and smooth roads. All I can say is I can't believe what I've been missing. It feels as tight as my 2015 Dodge Charger. This was worth the money!

You don't know what you're missing until you try it. A well-set up Marauder can run circles around a Dodge Charger. Congrats on the upgrade!

[CWright]

You don't know what you're missing until you try it. A well-set up Marauder can run circles around a Dodge Charger. Congrats on the upgrade!

True dat.....my RT is about half the power of my Marauder. :D

[justbob]

How high does it sit? It's taken my cut springs thirteen years to settle right where I want. Hate the ride, but love the look.


Sent from my iThrone using Tapatalk

[RubberCtyRauder]

How high does it sit? It's taken my cut springs thirteen years to settle right where I want. Hate the ride, but love the look.


Sent from my iThrone using Tapatalk

They are adjustable in terms of height. I'm ordering mine in a week or so. Been gathering info from Roger and Chris.

[lifespeed]

How high does it sit? It's taken my cut springs thirteen years to settle right where I want. Hate the ride, but love the look.

It sure is easier to turn a threaded adjuster than guess how far a spring will sag. Not to mention the ability to install enough damping for good ride and handling.

Just say no to parts store shocks.

[CWright]

How high does it sit? It's taken my cut springs thirteen years to settle right where I want. Hate the ride, but love the look.


Sent from my iThrone using Tapatalk

Measured from ground straight across wheel to fender well and we started at 27" and it settled to 26 5/8. I'm going to raise it back up to 27 but going to see if it settles anymore after driving.

[Turbov6Bryan]

27 inches from ground to front fender lip, I forget... Stock size front tires?

Pics when ya got em


How well does this handle big pot holes?


Awesome setup guys

[MOTOWN]

How high does it sit? It's taken my cut springs thirteen years to settle right where I want. Hate the ride, but love the look.


Sent from my iThrone using Tapatalk

Funny you should ask that question! I was telling Chris your car is the reason i went with the coilovers! I've never been a fan of lowered vehicles , but your car has the best stance of any marauder I've seen , Coyote now has that exact stance , and Silver will be getting it this weekend, going from a high Roller to a low rider! Lol

[CWright]

27 inches from ground to front fender lip, I forget... Stock size front tires?

Pics when ya got em


How well does this handle big pot holes?


Awesome setup guys



http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png.h tml)

Thanks buddy!

It took the one in didn't see today pretty good. It wasn't too bad but I try to avoid if all possible. :D

Also running the 255 upfront.

[MOTOWN]

http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png.h tml)

Thanks buddy!

It took the one in didn't see today pretty good. It wasn't too bad but I try to avoid if all possible. :D

Also running the 255 upfront.

Hell me likey as is!:bows:

[MMBLUE]

going from a high Roller to a low rider! Lol

Way to go !!!!!!!!!!!!!!!

[WPG_Merc]

http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/D81F9D85-5A33-427F-87E4-E07AED39A635_zpsy8wrqram.jpg.h tml)
http://i1342.photobucket.com/albums/o776/CDUBMERC/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png (http://s1342.photobucket.com/user/CDUBMERC/media/Mobile%20Uploads/5696AC67-9DFE-43E3-AB66-CA73700ED081_zpslsm31mu5.png.h tml)

Thanks buddy!

It took the one in didn't see today pretty good. It wasn't too bad but I try to avoid if all possible. :D

Also running the 255 upfront.
:bows: Looks Awesome :bows:
I hope to go Whipple in a year. :rolleyes:

[lji372]

Hey cdub, better get this ;)

Ikzm_4Adz3U

[Turbov6Bryan]

Three thumbs up!

[CWright]

Hey cdub, better get this ;)

Ikzm_4Adz3U

:hmmm::thinker: I like that!

[justbob]

Funny you should ask that question! I was telling Chris your car is the reason i went with the coilovers! I've never been a fan of lowered vehicles , but your car has the best stance of any marauder I've seen , Coyote now has that exact stance , and Silver will be getting it this weekend, going from a high Roller to a low rider! Lol


Well thanks Bud!


Sent from my iThrone using Tapatalk

[justbob]

Measured from ground straight across wheel to fender well and we started at 27" and it settled to 26 5/8. I'm going to raise it back up to 27 but going to see if it settles anymore after driving.


Damn son! I just had to go measure and I'm at 26 7/8" on 235's..
http://uploads.tapatalk-cdn.com/20160601/eb3deb040034c2a372f3b34d792023 88.jpg
http://uploads.tapatalk-cdn.com/20160601/d8725db437191c282dbc1a357b0cce 23.jpg

I just couldn't live with anything in the 27's! [emoji4] Yours looks nice and stealthy now!


Sent from my iThrone using Tapatalk

[CWright]

Damn son! I just had to go measure and I'm at 26 7/8" on 235's..
http://uploads.tapatalk-cdn.com/20160601/eb3deb040034c2a372f3b34d792023 88.jpg
http://uploads.tapatalk-cdn.com/20160601/d8725db437191c282dbc1a357b0cce 23.jpg

I just couldn't live with anything in the 27's! [emoji4] Yours looks nice and stealthy now!


Sent from my iThrone using Tapatalk

Thanks bro! I knew we had to be close on height now. Yours looks awesome!

[justbob]

Lowering has always been my favorite mod I ever did! The regular factory ride height looks like a truck to me. Instant turn off. It yielded stares and thumbs up literally over night.

Enjoy Bud!


Sent from my iThrone using Tapatalk

[2,4shofast]

I really love the stance of your car, now I have to go and see how low mine sits! I really hope I don't need to buy more stuff for the Marauder now :bows:

[babbage]

Nice job on the install Motown - 2nd time is always easier. ;) I am going to get a set of ridetech's! Next on list. (waiting for new TC to arrive)

[a_d_a_m]

Lowering has always been my favorite mod I ever did! The regular factory ride height looks like a truck to me. Instant turn off. It yielded stares and thumbs up literally over night. +1. Took my MM to a car cruise last night and couldn't believe the interest it got. Last time I was at this car show with the stock ride height, nobody gave a crap.

[ChiTownMaraud3r]

+1. Took my MM to a car cruise last night and couldn't believe the interest it got. Last time I was at this car show with the stock ride height, nobody gave a crap.

My car lowered, with projector retrofits, badgeless grille, and mach 1 lip gets mad thumbs up. Absolutely love the lowered look on these. :D

[fastblackmerc]

Stock height, gets :up: :up: all the time.

[2,4shofast]

Damn that is low,I just measured mine and it's 26 3/4 in the front and 26 1/2 in the rear.
http://img.photobucket.com/albums/v259/shofast/MM/20160610_161043_zpsrlv68wri.jp g (http://smg.photobucket.com/user/shofast/media/MM/20160610_161043_zpsrlv68wri.jp g.html)

[chief455]

Got it aligned this morning and just drove about 20 miles. Took some curvy roads, bumpy roads, and smooth roads. All I can say is I can't believe what I've been missing. It feels as tight as my 2015 Dodge Charger. This was worth the money!

OK, I've read enough. I got all 4) 32 way adjustable front/adjustable rear coil overs for my Charger for the cost of just front RideTech for Marauder. :eek:
Going to sell something and go this route to properly lower my Marauder front, and get Roger's old 10" rims out back.
Thanks for the inspiration, buds! :beer:

[CWright]

Awesome buddy! You won't be disappointed! Glad I could assist in making your decision! :D

[chief455]

Awesome buddy! You won't be disappointed! Glad I could assist in making your decision! :D

Yes, now, what to sell to raise a grand....:confused:
It was a no brainer to get all 4 for under $700 to lower my Daytona a bit. :cool:
Marauder looks like a plow truck with side steps, hosting all stock suspension bouncies :help:

[guspech750]

OK, I've read enough. I got all 4) 32 way adjustable front/adjustable rear coil overs for my Charger for the cost of just front RideTech for Marauder. :eek:

Going to sell something and go this route to properly lower my Marauder front, and get Roger's old 10" rims out back.

Thanks for the inspiration, buds! :beer:


Sell yourself late at night in dark alleys to raise funds.


Sent from The White House on taxpayers dimes.

[cer0413]

Sell yourself late at night in dark alleys to raise funds.


Sent from The White House on taxpayers dimes.
I'm on Michigan ave now.

[camelgrundle]

$20 handies are not a crime, they are convenient ;)

[chief455]

Sell yourself late at night in dark alleys to raise funds.


Sent from The White House on taxpayers dimes.

Nobody pays. Truckers, fast food cooks, gas station clerks - everyone wants a handout job :shake:

[justbob]

I'm on Michigan ave now.


Better off on Rush ST. or pick a corner any corner in Cicero.. I wouldn't know, but that's what a friend said.


Sent from my iThrone using Tapatalk

[Guittard22]

It over 1400 hp lol Chris 700 hp and roger 750 hp looks loke you guys had fun .

[cer0413]

Better off on Rush ST. or pick a corner any corner in Cicero.. I wouldn't know, but that's what a friend said.


Sent from my iThrone using Tapatalk
I'm dying to know of this so called friend that knows such info? lol

[guspech750]

I'm dying to know of this so called friend that knows such info? lol


Hi


Sent from The White House on taxpayers dimes.

[jmsa540]

Good stuff, where exactly do you live in GA? I'm going back to Columbus in about 8 months for the next three years...

[MOTOWN]

Good stuff, where exactly do you live in GA? I'm going back to Columbus in about 8 months for the next three years...

15 minutes outside of Atlanta.

[jmsa540]

Nice, I'll be moving back to Columbus in about 8 months.

[Mr. Man]

Were the ball joints etc all basic Marauder parts or did you order special heavy duty or extra length or what ever term you use for the replacement parts. Looking to start collecting parts for a rebuild. Probably just do KYB's and stock springs as the old ones have settled to a good stance.