Quick Q about the Motive Gears

[BeeDamn]

Hi

I want to ask is this the right GEARS (https://www.amazon.com/gp/product/B000S6BW8A/ref=ox_sc_act_title_1?ie=UTF8&psc=1&smid=ATVPDKIKX0DER) from Motive for our stock 28 spline gears?

I know it's fit ford 8.8 but all of them the same?

Thanks

[RF Overlord]

As far as the ring & pinion, the number of splines on the axle shafts is irrelevant, so yes they are the right ones.

I do question why you want to go through all the trouble of going up one step, though. It will not make a noticeable difference.

[MyBlackBeasts]

If you have a MM with OEM 3.55's, the move to 3.73's is a waste of $$$.

Go right to the 4.10's, you won't be sorry!

[BeeDamn]

Thanks for the confirmation guys!

And for the ratio I forgot to mention that the car already has a 4.56! which is too much for me I know the 4.10 is the best no doubt, But we don't do a 1/4 mile in here and I can't afford a big wheels with a drag tires for the traction specially i'm going for the Eaton and it's hard for me to handle it in low RPMs without wheel spin! So I read a lot about gears in here and kinda see the 3.73 is suitable for me, I don't want to lose the top end and I want a good lunch on rolling!

Thank you guys that's make me happy to see you want the best for me :)

[RF Overlord]

Good points, BeeDamn...if I had known I'd be getting a Trilogy, I would have left the 3.55s in The Blackbird.

[1Marauder]

Good points, BeeDamn...if I had known I'd be getting a Trilogy, I would have left the 3.55s in The Blackbird.


Love this^^^
Further, if you freeway cruise in areas where you can move down the road, stock gear ratio really helps. 84 mph at low rpm, car runs out nicely.

Gotta admit though, love the 4.10 in town.

[lji372]

Good points, BeeDamn...if I had known I'd be getting a Trilogy, I would have left the 3.55s in The Blackbird.

^^^^^^^^^^this right here :2thumbs: