PDA

View Full Version : Pretty Nice Score (I Believe)



cobra3073
09-01-2016, 03:43 PM
I had been looking for a block to put together a backup motor for my stock 2003 Marauder and found what I believe is a GREAT deal off Ebay, no less.

http://www.ebay.com/itm/01-Cobra-Teksid-block-and-more-/322246284625?vxp=mtr&nma=true&si=iXWuYZDo4BlB1aovJjrrkXIf5V8 %253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557

What is REALLY nice here are the extra parts that I am getting:banana2:!

Who knows, I may build this one "beyond stock", since I will have some GREAT parts from the start.

BT

Turbov6Bryan
09-01-2016, 04:03 PM
450 for teksid block?

SteelQualityMan
09-01-2016, 04:12 PM
According to your link this block and accessories went unsold because the minimum required bid was not met. So no score? Or did they just forget to update the web page?

Sent from my LG-H901 using Tapatalk

cobra3073
09-01-2016, 04:30 PM
Page apparently not updated.

,,,and No, the $450.00 includes much more than just the block. Go to the last photograph to see all the additional parts.

BT

RubberCtyRauder
09-01-2016, 05:07 PM
phone doesnt show additonal pics, what parts extra do you get? many items are marauder specific to use in a marauder.

stevengerard
09-01-2016, 05:11 PM
scroll down, no pics, it is in the description

Also comes with H-Beam rods & Probe Pistons, timing cover, valve cover plates, main caps, factory quad cams, new injectors, and other engine accessories (pulleys, chrome alternator, etc)-

MOTOWN
09-01-2016, 05:19 PM
The page says "0" BIDS! Reserve not met.

cobra3073
09-01-2016, 05:41 PM
scroll down, no pics, it is in the description

Also comes with H-Beam rods & Probe Pistons, timing cover, valve cover plates, main caps, factory quad cams, new injectors, and other engine accessories (pulleys, chrome alternator, etc)-
What he said:banana2:

BT

RubberCtyRauder
09-01-2016, 05:57 PM
i did scroll down, nothing shows on my phone except the 1 block pic

cobra3073
09-01-2016, 06:21 PM
Don't understand why you all cannot see the pictures at the bottom of the page; especially the last one that shows all the additional parts. I will post up pictures when I receive the parts next week.

Also figured out what happened with the EBAY page. Seller had advertised with a preference for local pick-up. About 10 minutes before the auction was to end, I emailed him asking if he would be willing to talk about possibly shipping if it didn't sell locally.

We subsequently spoke at the end of the auction and I was able to convince him that my shipper "Forward Air" could handle it with minimal effort on his part. He finally agreed and it should be on its way to me on tomorrow.

Again, will post up pictures when I receive the parts.

I will be needing a lot of help from you guys as I put together the "spare" motor. Also found a '98 Mark VIII here in a local junk yard that still has the motor in it (transmission is gone). Might just get the whole motor with accessories, as necessary. That one is only $198.00 for the complete motor. I understand a lot of the parts are interchangeable.

BT

Turbov6Bryan
09-01-2016, 06:32 PM
Ummmm doesn't say cc dish on Pistons , piston size or rod length

I spy a Diablo MAF translator :)

Ourobos
09-01-2016, 06:57 PM
Or more importantly, the DIAMETER of the pistons.. I'll bet the block needed an overbore, and he would have needed new pistons, thus the 'cheap' sale.. Let us know when you get it.

cobra3073
09-01-2016, 07:00 PM
Ummmm doesn't say cc dish on Pistons , piston size or rod length

I spy a Diablo MAF translator :)
Good eye!!

As I said, I think it is a pretty good deal.

BT

cobra3073
09-14-2016, 08:14 PM
Ok, I received the block and parts today. The block appears to be standard bore and looks good with no ridges or any apparent damage to the cylinders.

Along with the block I received the following parts which I have catalogue based on part numbers:

Item Part Number
Block RFA XR3E 6015 C
Connecting Rods H Beam Y5933
Rod Bolts ARP 2000
Probe pistons (8) Dish
Probe Piston (7) Dish
Left Intake Cam XE 6A271 278766 (FR 500) New
Right Intake Cam XE 6A270 278765 (FR 500) New
Exhaust Cams (2) F2LE 6A272AE (’98 Cobra)
Engine Oil Cooler F82E 6A427 AB
24 LB Fuel Injectors (8) XR3E C5B (New)
Alternator (Stock) YR3U AB
Alternator (Chrome)
Alternator Bracket XR3E 10153 AB
Diablo Mafio
Cam Sprocket (RH) F7LE 6256 AA
Cam Sprocket (LH) F5AE 6256 AD
Crankshaft Damper F6ZE 6316 AC
Timing Chains (2)
Timing Chain Guide F5LE 6K297 BB (RBI)
Timing Chain Guide F5LE 6K297 AB (LBI)
Timing Chain Guide F5LE 6K297 AB (LB4)
Belt Idler Pulley F65E 19A216 AA / 1L2E 19A26 AC
Chain Tensioner XL1Z 6L266 AA
Timing belt Tensioner XL3Z 6L266 AA
Coolant Overflow Tank
Crankshaft Main Caps


Also, have a number of front dress chrome parts which do not have numbers.


Based on my check of the above numbers, I think this is indeed a good score, especially the NEW camshafts. What do you guys thing...got all of this for 700$ (Including 250$ for shipping from Cali).



BT

1Marauder
09-14-2016, 08:23 PM
Great Job! Nice Score!