Watts Link Nut size

[BlkMamba24]

Hey guys i just need to know what size the watts link nut that comes off the gear housing is. I try and take off the bolt on top that holds the watts link on and the nut spins and i dont have a wrench big enough to hold the still.

[MOTOWN]

Your going to need a 30mm deep socket if your referring to the watts link stud.

[Comin' in Hot]

I used a deep snap-on impact socket, it's the only socket I could find that was deep enough, barely.... it only fits like half way on the bolt head.

[BlkMamba24]

No not the bolt, i have a socket to fit the bolt but its a nut right under that bolt that has to be held still...its bigger than the 1" wrench that have which is the biggest in my tool box

[BlkMamba24]

I'll snap a pic tomorrow afternoon when i get back on it

[MOTOWN]

No not the bolt, i have a socket to fit the bolt but its a nut right under that bolt that has to be held still...its bigger than the 1" wrench that have which is the biggest in my tool box

That's the Watts link stud , it's 30mm.

[BlkMamba24]

Ok thanks Motown, i was confused when you said put a deep socket on it bcuz i wouldnt be able to pass the bolt and the parts of the watts link that connect right there first. So i just need a 30mm wrench on the nut or the inches equivalent to stop that nut from turning while i take that bolt off

[Mr. Man]

Make sure you eat your Wheeties as it's torqued on there at about 200lbs.