Radiator Bypass Hose bracket

[stevengerard]

I don't even know if this exists but I thought there was a bracket that holds the bypass hose close to the radiator and away from the pulleys and belt. This is the vertical hose on the driver's side that feeds the crossover tube. The bracket was located near the bottom of the radiator. Was there one, anyone have an extra? Maybe it was supplied in my Vortec kit, not sure if it was original to a Marauder

[justbob]

There was a plastic hanger that held up the lower hose next to the tee fitting for the reservoir. It held the hose up and tight to the bottom of the radiator.

Since I removed literally everything radiator related I "should" have it laying around and it's yours if I do. I'll go check in my various parts piles.

But there was no bracket for the vertical hose.


Sent from my iThrone using Tapatalk

[stevengerard]

much appreciated will look better than zip ties!!!

[justbob]

http://uploads.tapatalk-cdn.com/20160910/a3bf6b6bcee4faf2d47217f0af2171 21.jpg

Found it. It clips into a slot on the bottom of the fan shroud. But being a Vortec, don't you guys run different fans? I fabbed up a hanger for Brandon's turbo because he eliminated his and went two duals. If yours is stock, then your new hanger is waiting for you in Winfield. [emoji6]


Sent from my iThrone using Tapatalk

[stevengerard]

Yes I believe my fan is from a Lincoln but I swear I made this one fit, really appreciate it, give me an excuse to meet up with you.

[justbob]

Tomorrow sometime? Kinda busy today with my daughters birthday. I'll PM my number.


Sent from my iThrone using Tapatalk

[stevengerard]

ha, I'm not that fast , or in that dire of a need. Most importantly happy birthday to your daughter!!! :party: