4:10 kit in my stock 04. Who in SEPA recommended?

[primuspilum]

I'm technically in the Phily burbs, but much closer to Wilmington DE.

Want to upgrade from 3:55 to 4:10.

Honestly, I'd go with whatever kit recommended by the shop.

Anybody local to this area have a good name?

Thanks.

[BAD MERC]

I have the Ford Racing 4.10 and LOVE it!! For added feel replace the flimsy control arms with billet ones. So far the best money spent when combined with a nice tune. The car "loses 800lbs" with those mods.

[fastblackmerc]

Any shop that works on Mustangs should be able to do it. Check with local Mustang groups.

[primuspilum]

Talked to these guys based on a recommendation that got IM to me here. http://www.performance-evolution.com/


The guy asked me if I want to sell him my Marauder. :)

I think he was only half joking.

[RubberCtyRauder]

dont forget you will need a tune at time of change to correct speedo and shifting

[vkirkend]

Talked to these guys based on a recommendation that got IM to me here. http://www.performance-evolution.com/


The guy asked me if I want to sell him my Marauder. :)

I think he was only half joking.


He does all my work, great guy!

[primuspilum]

dont forget you will need a tune at time of change to correct speedo and shifting



thanks for the heads up. it was part of the estimate he sent me


Sent from my iPhone using Tapatalk

[primuspilum]

Dropped it off yesterday to get the work done. :D

[1Marauder]

I'd be interested in the rough overall cost, and your thoughts on "the change/difference"

[primuspilum]

I'd be interested in the rough overall cost, and your thoughts on "the change/difference"



I'll post upon completion. Still a couple days from pickup, he had a 4 day dyno rental


Sent from my iPhone using Tapatalk

[fordfrk]

Had my 4:10 installed and tune done there. Did a great job .

[Mr. Man]

Had my 4:10 installed and tune done there. Did a great job .
One more post to go Jack. Come on you can do it!!:cheer::cheer: :cheer:

[primuspilum]

Had my 4:10 installed and tune done there. Did a great job .



Just got back home from picking it up.

Glad I got it done. It's a different car. Yuuuugggge difference.

[primuspilum]

I'd be interested in the rough overall cost, and your thoughts on "the change/difference"

Parts were ~$1300

Parts Install $475

Dyno/tune $350

Also got a SCT x4 power Flash Programmer $399


Huge difference. As a noted above. Very pleased. I drove it back from Smyrna DE, which is about 50 miles. It's a DD, which my wife occasionally drives, so I didn't want it too aggressively tuned. Shift pressure is noticeable, but not abrupt.

Anyway, it is a significant improvement.

Fun meter was pegged on the ride back.

I had to suppress a giggle or two.

[1Marauder]

"Had to surpress a giggle or two"... PRICELESS.

[Black&Gifted]

Parts were ~$1300

Parts Install $475

Dyno/tune $350

Also got a SCT x4 power Flash Programmer $399


Huge difference. As a noted above. Very pleased. I drove it back from Smyrna DE, which is about 50 miles. It's a DD, which my wife occasionally drives, so I didn't want it too aggressively tuned. Shift pressure is noticeable, but not abrupt.

Anyway, it is a significant improvement.

Fun meter was pegged on the ride back.

I had to suppress a giggle or two.

Congrats. 4.10s add some umph to the car.

What was included in parts price for $1300? Did you have the entire rear end rebuilt and/or go with 31 spline axles? If not, seems pretty high for 4.10s and install kit.

[crouse]

Gears are only about $200 plus clutches and lube are about $150. What other parts did you have installed?

[crouse]

Congrats. 4.10s add some umph to the car.

What was included in parts price for $1300? Did you have the entire rear end rebuilt and/or go with 31 spline axles? If not, seems pretty high for 4.10s and install kit.

Sorry, didn't see your post.

[primuspilum]

Congrats. 4.10s add some umph to the car.

What was included in parts price for $1300? Did you have the entire rear end rebuilt and/or go with 31 spline axles? If not, seems pretty high for 4.10s and install kit.

Yes.


http://i802.photobucket.com/albums/yy309/toecutter_01/Picture1_zpsyfsk2wjk.jpg

[crouse]

Nice setup.

[primuspilum]

Nice setup.

Thanks. I figured if I was going to have it done, was gonna get it done soup to nuts.

I'll eventually go for the billet control arms as suggested above as well, I think.