PDA

View Full Version : Offset question on wheels


Gerry24
10-19-2016, 08:41 PM
I was looking at a used set of iroc type black wheels that are 22x10 with 45 millimeters offset. Would they pop out too much in the front? Feed back is welcome. The price is is good with tires.
Gerry24
10-19-2016, 08:43 PM
These are the wheels.
MOTOWN
10-19-2016, 09:41 PM
45mm is a perfect offset on a 10" wheel , they will tuck within the fender nicely.
Gerry24
10-19-2016, 09:44 PM
I appreciate that MoTown:beer:
MOTOWN
10-19-2016, 09:46 PM
I appreciate that MoTown:beer:

I just ordered a set of 20X10s for the front with a 45mm offset ,you will be happy with the fit.
burt ragio
06-06-2017, 06:37 PM
45mm is a perfect offset on a 10" wheel , they will tuck within the fender nicely.

What offset & width are you running in the rear ?
What size tires front & rear ?
MOTOWN
06-06-2017, 08:50 PM
What offset & width are you running in the rear ?
What size tires front & rear ?

The new rear wheels will be a mini tub job I'm running a 20X14 on a +40MM offset , keep in mind I'm also installing a 9" ford rear end narrowed to accommodate the wheels so the offset of the wheels doesn't matter the way it would on a stock Marauder.
1Marauder
06-06-2017, 08:57 PM
Can you tell him/us for a stock Marauder?
DWSTANG67
06-06-2017, 09:46 PM
Can you tell him/us for a stock Marauder?

The stock rim is a 50mm offset running a 245/55/18 in rear and 235/50/18 in front

I run boss 328 chrome rims at a 40mm offset with stock size fronts and 265/50/18 rear and they sit nice.

So if he runs 45mm offset he will be in the range
2,4shofast
06-07-2017, 09:36 AM
Can you tell him/us for a stock Marauder?

There is a pretty wide range of offsets that can be used, my set up is 20X8.5 +40 F and 20X10 +35 with 245/35 and 275/35's. The offset will just determine how wide of tires you can run. I have ran a 255/35 and 285/30 but with my offsets it was as wide as I could manage. But each of these cars sit just a bit different so the only way to really check with wide set ups is to try
ChiTownMaraud3r
06-07-2017, 11:17 AM
No matter the offset, a 10" wheel up front will stick out too much.
MOTOWN
06-07-2017, 12:08 PM
No matter the offset, a 10" wheel up front will stick out too much.

This statement couldn't be more incorrect , clearly you have no personal experience with what your attempting to speak on.
ChiTownMaraud3r
06-07-2017, 12:55 PM
This statement couldn't be more incorrect , clearly you have no personal experience with what your attempting to speak on.

To some, if it sticks out any more than stock it is too much.. so statement stands.

Besides, there's no way a 10 inch wide wheel with a +45 offset is not sticking out over stock. It will be around more than 1 inch farther out. If you don't think it looks ghetto, then go for it.
MOTOWN
06-07-2017, 01:08 PM
To some, if it sticks out any more than stock it is too much.. so statement stands.

Besides, there's no way a 10 inch wide wheel with a +45 offset is not sticking out over stock. It will be around more than 1 inch farther out. If you don't think it looks ghetto, then go for it.

Ill get right on that!
gdmjoe
06-07-2017, 05:49 PM
For your listening pleasure, reading enjoyment, and reference ...
http://www.gdmjoe.com/gothvic/wheels/frppmmrim-e.jpg

http://www.gdmjoe.com/wheels/rimmeasurements.jpg