Intake swap for vortech

[orangeconv]

May be dumb but can't u just put a 01 cobra intake on and run a shelf vortech?

[Zack]

Sure but the piping will not clear the AC lines and other stuff

[justbob]

It may clear if you use a 98-02 Marquis A/C condenser like I did. The lines come out several inches lower and hook right up to ours.

Mounting brackets are different but no biggie..


Sent from my iThrone using Tapatalk

[orangeconv]

Got picts of your setup?

[justbob]

http://uploads.tapatalk-cdn.com/20161024/a884aad4a5dca138e49d20b0b234b2 51.jpg
http://uploads.tapatalk-cdn.com/20161024/2e89c33b57972507ce680811090cb6 9a.jpg
http://uploads.tapatalk-cdn.com/20161024/3823b437110cfb51a3e41be69bcbff 69.jpg
http://uploads.tapatalk-cdn.com/20161024/81ce690cca4fb892f3fd3047131b24 80.jpg
http://uploads.tapatalk-cdn.com/20161024/31888efadfe9d0509aec743b3cfe0f 20.jpg

As you can see, the condenser lines easily clear the 3 1/2" piping with room to spare on mine. The original condenser lines ran dead nuts center of my pipes. No fabbing whatsoever except maybe brackets. As you can see my radiator has been relocated so the two no longer bolt together. Not sure about the older one bolting right to the OEM radiator.




Sent from my iThrone using Tapatalk

[orangeconv]

Thanks man, I bought a coyote to put in it. So as of now I guess don't need an intake swap