View Full Version : found headlamp switch replacement bulb
stevengerard
11-07-2016, 10:46 PM
Its not an exact replacement but it fits nicely and looks great. No modifications needed just insert and twist. As you can see its shorter then the Ford OEM bulb but being a green LED it is bright enough it works well enough. A little different green, I actually like it better. I did a bunch of research and IIRC it is from a Mazda dashboard light. They are called Neo Wedge LED bulbs
By the way, does anyone remember/know if the dimmer switch is supposed to light up
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 886&stc=1&d=1478583148
New LED light
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 885&stc=1&d=1478583148
Compared to the original Fog Light Green
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 884&stc=1&d=1478583148
fastblackmerc
11-08-2016, 05:58 AM
Its not an exact replacement but it fits nicely and looks great. No modifications needed just insert and twist. As you can see its shorter then the Ford OEM bulb but being a green LED it is bright enough it works well enough. A little different green, I actually like it better. I did a bunch of research and IIRC it is from a Mazda dashboard light. They are called Neo Wedge LED bulbs
By the way, does anyone remember/know if the dimmer switch is supposed to light up
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 886&stc=1&d=1478583148
New LED light
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 885&stc=1&d=1478583148
Compared to the original Fog Light Green
http://www.mercurymarauder.net/forums/attachment.php?attachmentid=44 884&stc=1&d=1478583148
Good find.
No the dimmer was not illuminated.
Doesn't matter if the LED is green or white as there is a green mask that the light shines thru.
An LED is usually much brighter than an incandescent.
BTW... I believe it's actually a "T5 Tall Neowedge".
I convert the originals to LED.
stevengerard
11-08-2016, 07:09 AM
The one I used was a T4. What's the difference between 4 and 5?
fastblackmerc
11-08-2016, 08:37 AM
The "T" size is the diameter of the base.
T3 = 8mm
T4 = 10mm
T5 = 12mm
I'll measure the base.
bugsyc
11-08-2016, 09:03 AM
https://d114hh0cykhyb0.cloudfront.net/timthumb.php?h=230&q=90&src=https://d114hh0cykhyb0.cloudfront.net/images/uploads/led-neox-instrument-panel.jpg&w=300&zc=2Is this it?https://www.superbrightleds.com/moreinfo/instrument-cluster-gauge/neox-led-bulb-instrument-panel-led/220/
fastblackmerc
11-08-2016, 09:04 AM
https://d114hh0cykhyb0.cloudfront.net/timthumb.php?h=230&q=90&src=https://d114hh0cykhyb0.cloudfront.net/images/uploads/led-neox-instrument-panel.jpg&w=300&zc=2Is this it?https://www.superbrightleds.com/moreinfo/instrument-cluster-gauge/neox-led-bulb-instrument-panel-led/220/
Nope.............
stevengerard
11-08-2016, 09:29 AM
close, I'll find the link and post later. Found a zillion of those, all too short but as bright as an LED is maybe a short one would work as well
ctrlraven
11-08-2016, 10:56 AM
I replaced mine with a Type B Tall (T4) Neo-Wedge from http://www.autolumination.com/74.htm
You can use White or Green coloring, white will give it the factory lightish green color, a green led will give it more of a deep emerald color.
stevengerard
11-08-2016, 02:37 PM
http://www.ebay.com/itm/2pcs-T4-Tall-Neo-Wedge-Dash-LED-Bulbs-Amber-Green-Red-UV-Purple/381837365675?_trksid=p2054502. c100227.m3827&_trkparms=aid%3D111001%26algo% 3DREC.SEED%26ao%3D1%26asc%3D20 160908103841%26meid%3Dbbba073c 439d40638b7cf3c2b9b27f3e%26pid %3D100227%26rk%3D4%26rkt%3D12% 26sd%3D282235986629
Ambitious1
11-08-2016, 03:04 PM
What tools did you use to take the headlight switch out of the dashboard without damaging the headlight switch?
fastblackmerc
11-08-2016, 03:18 PM
What tools did you use the take the headlight switch out of the dashboard without damaging the headlight switch?
I remove the instrument bezel first.
I suppose you can get a plastic pry tool in there.
stevengerard
11-08-2016, 04:23 PM
I just used a plastic pry tool much easier. Push in on the left side first, then up top and then it pops out
RoyLPita
12-21-2016, 01:27 PM
Is the bulb (not LED) the same as the one for the instrument cluster lamps?
fastblackmerc
12-21-2016, 01:48 PM
No they are different.
RoyLPita
12-21-2016, 02:01 PM
Is there a number for the standard lamp?
Powered by vBulletin® Version 4.2.5 Copyright © 2026 vBulletin Solutions Inc. All rights reserved.