A/C Condensor and ?

[Lowndex]

KC wants to replace the A/C Condenser: 19712 (YJ-441) at $196.68 from Ford Parts.

What else should I replace now?

[Turbov6Bryan]

KC wants to replace the A/C Condenser: 19712 (YJ-441) at $196.68 from Ford Parts.

What else should I replace now?

Hoses, orifice tube, pag oil, o rings and I would check the accumulator for rust
It's on the front of the engine ish and covered in foam, tends to rust out over time

At least triple check the accumulator please, it'll be the next item to break if you don't replace it

[fastblackmerc]

At the very least replace the receiver dryer (accumulator), orifice tube and all the o-rings.

[FordNut]

If you're considering a Killer Chiller this is the time.

[Lowndex]

Thank you all three. As so many parts are being replaced, I am thinking of letting my local Ford dealership do the work. Of course, the Killer Chiller (http://killerchiller.com/) KC will install.

Advice?

[Lowndex]

If you're considering a Killer Chiller this is the time.

What is the difference between this system - link (http://killerchiller.com/products/99-04-v8-mustang-kc-system)

and

the parallel system for supercharger application - link (http://killerchiller.com/products/universal-parallel-kit)?

As I will be installing an ADTR Vortech blower, which system should I purchase, please?

[RubberCtyRauder]

killer chiller designed for a roots blower, not a centri since it is not using an internal coolant intercooler below the blower. you'll use an air to air intercooler out front behind grille,bumper

[lji372]

Water to air with killer chiller....hmmm....

[RubberCtyRauder]

Water to air with killer chiller....hmmm....

has anyone done it? water to air and custom built killer chiller ? I wouldn't think it is needed. justbob for instance, never has an iat issue with his F1 and a proper air to air intercooler

[sailsmen]

Let it Snow, let it Snow, let it Snow.

At the PSI you have previously referenced the only reason you would need it is if you have low octane fuel.

[lifespeed]

KC wants to replace the A/C Condenser: 19712 (YJ-441) at $196.68 from Ford Parts.

What else should I replace now?

The receiver/dryer bolted to the frame rail is steel and rusts out. Change it out for an aluminum one, possibly from Rockauto. Lighter too, LOL.

[Lowndex]

I am replacing both the condenser and evaporator along with related parts suggested herein.

[lifespeed]

What is the difference between this system - link (http://killerchiller.com/products/99-04-v8-mustang-kc-system)

and

the parallel system for supercharger application - link (http://killerchiller.com/products/universal-parallel-kit)?

As I will be installing an ADTR Vortech blower, which system should I purchase, please?

As far as I could tell those systems are intended to cool the liquid in a liquid/air heat exchanger. The ADTR kit uses air/air intercooling. I don't think the Killer Chiller is compatible with air/air, although surely something could be made up.

I would put this in the category of try the standard setup first and see if there is an intake air temperature issue. I suspect there won't be.